a bipod on my poly M305

[alain1]

hi everyones, i just receive my rifle. Very excited. I only want to know the best way to fixed my bipod on the stock. I saw the small hole on the extremity. But how to fixed it.

 

[berger]

I drilled out the two sling rivets and added a Harris Bipod adapter 2a. I then epoxied the adapter into the hole (it does screw down). That was before they had these available...from fabsports.ca

 

[fnrob]

I went this route for mine. It seems to be holding out pretty good.

 

[Spearhunter]

I think the small hole on the extremity you noted is for gas to have a way out.

I saw one that required the rivet holding the swivel to be drilled out and a rail placed over the hole before a bolt was screwed in to replace the rivets.

hi everyones, i just receive my rifle. Very excited. I only want to know the best way to fixed my bipod on the stock. I saw the small hole on the extremity. But how to fixed it.

 

[Fenix.NZ]

the hole in the stock is a drain hole.. lets water out if you were to participate in a beach landing and submerge your rifle.

so you could use the hole.. im going to

 

[Spearhunter]

Good to know. If that is the case I might go that way too.

 

[J996]

3 X 12" wood dowels and some paracord. Cheap, light, stable, portable, disposable.

Unless you are rapidly displacing while assaulting enemy positions in the sandbox.......now you could use a Harris.