A lighter trigger pull for Tavor?

S

Solar

Regular
EE Expired
Rating - 100%
10   0   0
Location
Alberta
Does anyone has a way to get a lighter trigger pull from the Tavor?

I know on the sticky there is a method by disconnecting a spring but this method will affect the trigger reset so I prefer not to use it.

I have contacted Canada Ammo - for liability reason, they cannot recommend anything.

Any other ideas?
 
When I took the spring out on mine the trigger was a bit sticky so I stripped the trigger group and polished it up,works 100%.
 
999 said:
When I took the spring out on mine the trigger was a bit sticky so I stripped the trigger group and polished it up,works 100%.
Click to expand...

Hi 999,

Care to share which component did you have to polish on the trigger group? Photo will be very helpful.
What was the trigger pull after the polishing?
By taking the spring out, how did it affect the trigger reset when the action is cycled?

S.
 
I polished all parts that made contact with one another.Before I did the polishing the trigger would not reset if I release it to slow.This is not the case with all trigger groups,of the 4 or 5 that I have looked at just removeing the spring was all that was needed.
 
999 said:
I polished all parts that made contact with one another.Before I did the polishing the trigger would not reset if I release it to slow.This is not the case with all trigger groups,of the 4 or 5 that I have looked at just removeing the spring was all that was needed.
Click to expand...

Any idea on the trigger pull once the spring is removed?
 
You must log in or register to reply here.
Back
Top Bottom