A little help

Toolman

CGN Regular
Rating - 100%
77   0   0
Location
SE Manitoba
Guys, I would like your opinions on the value of these items. Got this in on trade and I'm not sure of the value. If I decide to sell it would be all or nothing.

I do NOT know the history or round count however the bore appears to be OK.

I do NOT have the BCG or the 2 roll pins that stake the front sight.

What do you think? Thanks.



IMG00438-20130108-1807_zps9eea7aa0.jpg


IMG00437-20130108-1805_zps4771657d.jpg


IMG00436-20130108-1804_zpsc7962158.jpg


IMG00435-20130108-1802_zpsbc6cbfea.jpg


IMG00433-20130108-1800_zps16f8bf42.jpg
 
The A2 upper is not going to be a great selling feature; most folks want a flat top to mount optics properly. In addition, it may not work with most lowers, if it needs the offset pins.
The barrel assembly would be desirable.
You should be able to get the $600 to $700 suggested, assuming that the bore is crisp. If it isn't, it is a pig in a poke.
 
Colt military&police Hbar $600 to $700 would be my guess.

Thank you.

FYI the front sight is held on by taper pins, not roll pins.

Good to know, I was guessing.

The A2 upper is not going to be a great selling feature; most folks want a flat top to mount optics properly. In addition, it may not work with most lowers, if it needs the offset pins.
The barrel assembly would be desirable.
You should be able to get the $600 to $700 suggested, assuming that the bore is crisp. If it isn't, it is a pig in a poke.

Bore appears decent, thanks for the info.
 
Back
Top Bottom