A review of the Foginator 2012 tumbler

stormbringer

stormbringer

CGN Ultra frequent flyer
Rating - 100%
19   0   0
Location
S.W. Ontario
Well my good friends............I was finally able to sneak some time away to play with the Foginator Model 2012.

It seems that Fogducker finally putting his evil genious into GOOD work..........has paid off.

This thing is a miracle!

I put well over 1000 rounds of .40 brass and it did not even break into a sweat! 2000 handgun cases would be a cinch!


Here is the video.....

http://smg.photobucket.com/albums/v169/EESAStorm/?action=view&current=101_0839.flv
 
I should note that if any EESA Types are in need of cleaning some brass let me know and it is yours to borrow..........

All part of the great service from Fogducker Enterprizes!
 
Hoser-eh said:
Bravo, Fogducker!!!
Did you achieve your target cost of $00.00?
Click to expand...

nawwwwwwwww.i had to break the bank when i had to buy the two pie plates at a cost of $0.99....

but i would like to thank all that participated and gave your opinions and thoughts on the construction of this,in the thread on it..with out all the help it would not have turned out as good as it did

cheers my fellow nutz:cheers:


Storm......hope it gives you and you club years of service,i love the name you gave it lol..
whos idea was that?

just keep me in mind if a few extra 30-06 brass becomes available eh;)

Don
 
SuperCub said:
Gonna post the plans?



.
Click to expand...

i had no plans.....it was cut and weld as i held the pieces togeather..the drive unit and controls were from a thread mill that was taken from the trash...

and dumbdawg and mommabear helped in the donations of the drum material,paint,silicone...
but if your interested in making one up..im sure i can help you out a bit more :wave:
 
fogducker said:
i had no plans.....it was cut and weld as i held the pieces togeather..the drive unit and controls were from a thread mill that was taken from the trash...

and dumbdawg and mommabear helped in the donations of the drum material,paint,silicone...
but if your interested in making one up..im sure i can help you out a bit more :wave:
Click to expand...

I'm thinking a smaller pc of PVC pipe with an end cap and theaded end would work well on a smaller scale.

.
 
fogducker said:
whos idea was that?
Click to expand...

That would be yours truely actually..........
I got to thinking of you, numbers, reloading and suddenly the image of an apocolypse came into my mind.
2012 being the Mayan Apocolypse........it seemed only logcial.



j
fogducker said:
ust keep me in mind if a few extra 30-06 brass becomes available eh;)

Don
Click to expand...

They are already set aside actually................next time you are in the area drop by or I can ship them out.
 
SuperCub said:
I'm thinking a smaller pc of PVC pipe with an end cap and theaded end would work well on a smaller scale.

.
Click to expand...

i would say you would far better off with a smaller pipe,unless you can get pipe caps for the bigger pipes..it would have been so much easier to build this one with pipe caps...
but working in a steel shop with all the toys sure made this easy once i had a plan..
if you want to build one..let me know how i can help you:wave:
 
You must log in or register to reply here.
Back
Top Bottom