A test with 210 accubond LR

[death-junky]

Super happy with tgis, 5 shots through same hole! 300 win mag 71gr of H4831SC with a 210 accubond LR. Hornady once fired brass, federal match magnum primers seated .100 of the lands COAL 3.586". I got my crony to work finally av 2845 fps out of a 26" barrel.
Edit: I worked up to this from 67 gr and no pressure signs going through the ladder.

 

[remington jim]

Nice Load ! That will be a DRT ! RJ

 

[legi0n]

spiffy
what distance?

 

[death-junky]

spiffy
what distance?

Only 100 yards. I loaded up 20 ore to the same spec to try at longer distances.

 

[Eagleye]

I am loading the 210 LRAB in a #1B Ruger that has been rechambered to 308 Norma Magnum.

I am using the WLRM primer in the Norma case, charged with 75 grains of Retumbo. It clocks
just over 2900 in the 26" barrel, and shoots groups very close to what you are seeing here.

I shot a young Bull Moose with it in the fall of 2019 at about 120 yards. I had a complete
pass through and the damage to his lungs was pretty dramatic. Basically DRT.
I also shoot the 180 Partition out of this rifle, but use H4831sc behind it. .75" groups at 3120
fps.

I will test the 180 A-Frame soon, and expect great results with it as well. Dave.

 

[chrismc]

I tried the ABLR in another caliber, and noticed they really like jump - was frustrated at the normal 15-20 thou jump, but then for s&g's, I tried the Berger method, and Viola! 90 to 110 thou jump tightened right up to 1/2 MOA