Adding a cheek riser to a Hogue 10/22 stock - help please

[gobigorgohome]

I purchased a Dlask Arms TUF 22 last spring. Although I enjoy the rifle, I am not not biggest fan of how low the cheek rise is on the factory hogue overmoulded stock. So my question is... Who offers an after marker cheek riser for these and how do you go about attaching them? I am not interested in taping a pool noodle or a flip flop to the stock, id prefer if it looked some what clean or professional once installed.

 

[Lead Sligner]

Look at Mathews Manufacturing . I have installed one on a Boyd's 10/22 and it worked out well. I made several similar ones with some Kydex sheets from Amazon for some other rifles.

 

[gobigorgohome]

Is there a distributer in Canada?

 

[S1de8urnz]

Bought this cheek riser at SFRC. Other sponsors carry them.

 

[thegrandpoohbah]

Tac Pro makes a good kydex cheek rest: https://tacpro.com/product_info.php?cPath=14&products_id=20

I'm sure there are others that are just as good.

 

[.22LRGUY]

I've used these twice now, and if your stock is black...they look great. (in my opinion) Easy install, but fixed height. Saddle it over the stock, make sure the position is right (front to back), mark the holes, drill 2 small pilot holes, fasten, insert plugs, trim plugs.

https://www.accu-riser.com/accu-riser-cp-4000p-monte-carlo-comb-raiser/

 

[savagelh]

You could just use one of the butt stock cheek pads with the zipper compartment. That's what I use on my 10/22's gives about 3/4" of rise and some storage for ammo, dope cards, gopher call etc.

 

[skoal]

Foam and a bunch of tape? Or are you a touch classier then that?

 

[Candocad]

Bradley make a nice quality kydex cheek riser too.

Candocad.

 

[Butcherbill]

You’ll pay more for it but Bradley is the nicest, no drilling holes or permanent mods to the stock.

There’s other options, search cheek riser on Amazon. Lots of them, some ghetto and some nicer.

 

[old303]

There don't seem to be a lot of options for nicer 10/22 stocks presently. I found myself almost tempted to buy one of Ruger's nicer offerings just for the laminated wood and swapping in Dlask or Grey Birch internals!

 

[Walterfisher]

I just use the Beartooth stretch/slipon type. Then I can put whatever cheek riser in the top pocket I like - hard or softer.

 

[Walterfisher]

Boyds makes a bunch of different stock designs. A lot of laminated. Lots of colors to choose and cheek riser or not.

 

[goldenbb]

Try this and you won’t use anything else.

https://www.youtube.com/watch?v=COoXVpGfXQE

 

[unicorn gravedigger]

https://www.cabelas.ca/product/77610/blackhawk-urban-warfare-ivs-cheek-pad

 

[unicorn gravedigger]

https://www.cabelas.ca/product/77609/blackhawk-rifle-cheek-pad

 

[gobigorgohome]

https://www.cabelas.ca/product/77609/blackhawk-rifle-cheek-pad

I have this one and tried the other. They just don't really stay in place, no matter what I try...

 

[unicorn gravedigger]

Ever try two sided tape?