Aguila 60 grain?

Norinco JW-13 Aquila 60 Grain 100 yards.jpg
I shot this group at 100 yards with my Norinco JW15a-13 (from the bench with a 4x scope), using the 60 grain bullets, the vertical dispersion is me. IIRC it's an 8 inch gong.

The internet tells me the rifle has a 1:14.3-inch twist rate.

So quite accurate ammo. They really smack the gong :)
 
I picked up a brick at a gun show long time ago. Tried it in a few .22 rifles and a Walther PPK pistol. Recoil was stout in the handgun. Accuracy was hohum, wouldn’t make the 1/2”@50yard club. lol

Clarke was modifying 10/22 rifles with fast twist rifling for the US snipers on the theory that the heavy projectile would penetrate a skull from any angle even from subsonic velocities and the increased recoil impulse would reliably cycle these suppressed rifles. Aftermarket barrels were available for a time, I believe in a 1/10 twist. I toyed with the idea but buying cheap ammo made in Mexico and an expensive barrel was just too much of a costly novelty so I passed. I think there is still half a brick of that ammo buried somewhere in my stash. Great idea that never took off. Just curious if someone on CGN actually bought that 1/10 barrel and tested it out. Curiosity has cost me lots of money and time. Cheers.
 
I picked up a brick at a gun show long time ago. Tried it in a few .22 rifles and a Walther PPK pistol. Recoil was stout in the handgun. Accuracy was hohum, wouldn’t make the 1/2”@50yard club. lol

Clarke was modifying 10/22 rifles with fast twist rifling for the US snipers on the theory that the heavy projectile would penetrate a skull from any angle even from subsonic velocities and the increased recoil impulse would reliably cycle these suppressed rifles. Aftermarket barrels were available for a time, I believe in a 1/10 twist. I toyed with the idea but buying cheap ammo made in Mexico and an expensive barrel was just too much of a costly novelty so I passed. I think there is still half a brick of that ammo buried somewhere in my stash. Great idea that never took off. Just curious if someone on CGN actually bought that 1/10 barrel and tested it out. Curiosity has cost me lots of money and time. Cheers.
Yes im motivated to make the experiment with a 1:9 barrel if i can obtain a couple bricks of the desired rounds
 
Ya im interested in building a gun but the rounds seem unobtanium.
What performance are you expecting out of the ammo? What benefit would the heavier bullet give you?


Maybe, but I know some who have tried it in conventional twists and it seems to shoot OK.
I had several bricks of the stuff years ago. I remember it being OK at best but not amazing and the benefit of the extra heavy bullet was nil.

For the types of targets you would reasonably use 22LR on, a heavier bullet doesn't really help with terminal performance. The 60gr bullets do penetrate deeper but they do not expand or create a larger wound track. The extra penetration is kinda moot because most people wouldn't try to shoot a big animal with a 22LR.
 
Expecting more punch, more foot pounds with less noise. Think standard velocity noise and slightly more weight behind it. But all theory for me. I just like a good project. It was an IDF thing but im a farmer with night racoons.
 
What performance are you expecting out of the ammo? What benefit would the heavier bullet give you?



I had several bricks of the stuff years ago. I remember it being OK at best but not amazing and the benefit of the extra heavy bullet was nil.

For the types of targets you would reasonably use 22LR on, a heavier bullet doesn't really help with terminal performance. The 60gr bullets do penetrate deeper but they do not expand or create a larger wound track. The extra penetration is kinda moot because most people wouldn't try to shoot a big animal with a 22LR.
At distance, with the low BC that shape bullet would give you, it would run out of steam fairly quickly. I would confine shots to less than 50 yards, maybe not more than 25.
Expecting more punch, more foot pounds with less noise. Think standard velocity noise and slightly more weight behind it. But all theory for me. I just like a good project. It was an IDF thing but im a farmer with night racoons.
If it is quiet enough and the range is short enough, the heavier slug, should work well.
 
Below is a chart comparing the Aguila 60 grain ammo to CCI SV 40 grain.

The drop of the lighter 40 grain bullet is about 80% of the heavier bullet's all the way out to 200 yards. At 50 yards the CCI SV drops about 4", the Aguila 5.1". At 100 it's about 17.25" vs 21.8".

The "hitting power" or energy of the CCI SV remains around 85% of the Aguila 60 grain round out to 200 yards, well beyond most hunting scenarios.

The wind drift in the chart below is shown for a 1 mph crosswind and obviously there is little difference between the two.

As far as accuracy is concerned it will depend on the quality of the ammo, how alike it is from one round to the next, and this is not only ES (although wide variation there is always problematic).

 
Expecting more punch, more foot pounds with less noise. Think standard velocity noise and slightly more weight behind it. But all theory for me. I just like a good project. It was an IDF thing but im a farmer with night racoons.
I've never shot a racoon but my guess is that a regular subsonic HP 22LR would pass right through a racoon. Thus the extra weight of the projectile would not transfer any extra energy to the target. Subsonics penetrate to a massive degree and carry the extra energy of a heavy projectile out the back side of the target.


If it is quiet enough and the range is short enough, the heavier slug, should work well.
These things are never as simple as people think. If you need the noise reduction because there are people nearby then you need to worry about the heavier projectile bouncing off the ground and creating a risk for the nearby people.

If there are no nearby people then you don't need the reduced noise. Catch-22.

When it comes to varmints, velocity is everything.
 
I've never shot a racoon but my guess is that a regular subsonic HP 22LR would pass right through a racoon. Thus the extra weight of the projectile would not transfer any extra energy to the target. Subsonics penetrate to a massive degree and carry the extra energy of a heavy projectile out the back side of the target.



These things are never as simple as people think. If you need the noise reduction because there are people nearby then you need to worry about the heavier projectile bouncing off the ground and creating a risk for the nearby people.

If there are no nearby people then you don't need the reduced noise. Catch-22.

When it comes to varmints, velocity is everything.
Ya interesting points. Ill have to study the ballistics more! P
 
Back
Top Bottom