All-New: Type 81M
- Thread starter Tactical Imports
- Start date
So what had stopped you from ordering one in the past?
You have to admit all of these new accounts with zero trader ratings all use the same "Bent" terminology is kind of odd no?
Since they are misaligned and not bent.
It should be interesting to see how many of these accounts just fade away when the dust settles?
It is strange how many new accounts are in here to complain
I can't speak for others, but I was never interested in a type 81 before for two reasons. One-I found the rifle with the barrel protruding past the front sight post ugly. Two-I did not understand why people pay almost triple the price of an SKS for an ugly rifle. Detachable magazines are a nice feature, but not that nice.
The UF looked hella cool, it was the first model that appealed to me, so I jumped on a hype boat. In retrospect I wish I just put this money towards a nice bolt rifle because the rifle I got, while is cool as hell, is slightly "bent", front post is slightly canted, the finish has a number of blemishes, and the overall quality of construction sucks. This is not at all what I expected from a modern manufacture rifle made for civilian market that costs 1200. I have been also pretty vocal about why I think TI engaged in unethical business practices. Feel free to look up my past posts if interested.
As for "bent" vs "misaligned", if that language is good enough for the Gnutzguy it's good enough for me and a bunch of other newer hobbyists who have been posting on here. The old guard needs to start thinking critically instead of just complaining about sick accounts going on a "smear" campaign. I am entirely unhappy withy shopping experience and won't be shopping with them again. Why can't others be unhappy and call a spade a spade?
I was broke since i was in university - i might be misinformed then, was just going off of what i seen online on reddit and this forum. Im wanting to get more involved in firearms now that i have disposable income. Didn't mean to come off as suspicious.
My opinion which might not be worth the paper it’s written on.
Bit of a bend big deal, shoot and enjoy, if you are worried about resale / trying to make money buy crypto instead of trying to swing trade type 81 rifles.
$1200 is not a lot of money for a reliable semi auto 7.62 rifle, not to sound arrogant but it really isn’t.
Also actual AKs you can tell who has never actually handled one, yes some are nice but a lot have the same “issues” you see here.
Yes I did have a problem with mine but it was a crack, if mine was bent I could care less as long as it functions properly.
Just shoot the damn things lol
Bit of a bend big deal, shoot and enjoy, if you are worried about resale / trying to make money buy crypto instead of trying to swing trade type 81 rifles.
$1200 is not a lot of money for a reliable semi auto 7.62 rifle, not to sound arrogant but it really isn’t.
Also actual AKs you can tell who has never actually handled one, yes some are nice but a lot have the same “issues” you see here.
Yes I did have a problem with mine but it was a crack, if mine was bent I could care less as long as it functions properly.
Just shoot the damn things lol
Difference is you had account since 2018. Many joined Feb, March and April his year, I should receive mine tomorrow. 281xx. That means 1000s have been received with little mention. I just think its strange that all these new mth old accounts are very active. I am pretty positive about tomorrows rifles. If there is a issue then ok, I will discuss it respectfully with TI.
I'm truly happy for whoever doesn't mind their rifle being out of alignment and who gets giddy just because their rifle goes bang. I do have a problem with those same guys telling others to not worry that their rifle is crooked though. In thos day and age it's simply unacceptable. As for $1,200 not being a lot of money for a 7.62, that's not the point. 1200 is a lot of money overall. Most of us have SKS that go bang in 7.62. most of us could also come up with a lot better uses for 1200. Like I don't know, a straight cool PCC and 1500 rounds for all your plinking needs?
just received mine today.
1. receiver has the "circle crack" mark. Will this be an issue?
https://drive.google.com/file/d/1rKF0jlxjx4tg63aIvLaPhhBt57URi1xT/view?usp=sharing
2 barrel and receiver are alined/ straight by eye but will test with a straight edge.
3 without mag, bolt holds open and you have to push it a little to close it. After cleanning it and cycling it many times, it is getting better.
4. the gas piston gadge is very tight to be turned from 1 to 0 and 2 and to be taken off.
With the upper hand guard removed, it still needs the tool to turn it and then you can take it off.
My t81SA is not like this.
Overall T81SA fitting and finshing is better than this one.
FYI: ordered on March 21
1. receiver has the "circle crack" mark. Will this be an issue?
https://drive.google.com/file/d/1rKF0jlxjx4tg63aIvLaPhhBt57URi1xT/view?usp=sharing
2 barrel and receiver are alined/ straight by eye but will test with a straight edge.
3 without mag, bolt holds open and you have to push it a little to close it. After cleanning it and cycling it many times, it is getting better.
4. the gas piston gadge is very tight to be turned from 1 to 0 and 2 and to be taken off.
With the upper hand guard removed, it still needs the tool to turn it and then you can take it off.
My t81SA is not like this.
Overall T81SA fitting and finshing is better than this one.
FYI: ordered on March 21
Type 81 owners have been calling it bent since the first import. Most of us know the true meaning behind it and so its basically become slang at this point. No different then people calling ARs direct impingment and free floated when they technically aint. Or people discussing barrel harmonics when from an engineering standpoint they are actually refering to "force vibrations".
I am glad you are in a better place and are looking forward to getting into the hobby, have fun shooting your purchases; I would avoid the 2nd and third hand internet gossip and form your own opinions from actual hands on experience.
One other thing, Norinco/Ploytech is not know for quality, this is highy documented; those expecting consistent quality from a Norinco/Polytech product have not done their home work. I mentioned previously in an earlier post the M305s that came with improperly indexed barrels, or cracked frames on their sig knock offs, or the T97 with the barrel/gas gouge just to name a few instances of their poor QC.
Norinco is budget friendly, if you want a quality AK style platform you should look at a Valmet, Norinco/Poly have always been a crap shoot at best.
It does not make it right, but it's the reality.
Enjoy your new T81
Last edited:
Merovingian
CGN Regular
- Location
- West Coast
Got some more goodies on the 81M.
MOE AK grip took abit of fitting but feels rock solid
The master mount rail is topped with a PA Prism 3x
Got a Mlok TI handguard on order and then just have to figure out what kind of stock to put on it >.<
MOE AK grip took abit of fitting but feels rock solid
The master mount rail is topped with a PA Prism 3x
Got a Mlok TI handguard on order and then just have to figure out what kind of stock to put on it >.<
God that AK grip looks so good!
Anyone know where there are guides on these rifles? Tips/tricks, how to best adjust the sights .... that kind of thing? I've read the user manual that ships with the rifle, but it doesn't cover much.
Also, my rifle is shooting high at 25 yards (yeah, I know). The rear sight is set in position "4". Is this an elevation adjustment, and does the 4 equate to something like 400 yards? I'd like to learn more about this platform, I'm just not sure where to start and I'd rather learn before making blind adjustments.
Anyone know where there are guides on these rifles? Tips/tricks, how to best adjust the sights .... that kind of thing? I've read the user manual that ships with the rifle, but it doesn't cover much.
Also, my rifle is shooting high at 25 yards (yeah, I know). The rear sight is set in position "4". Is this an elevation adjustment, and does the 4 equate to something like 400 yards? I'd like to learn more about this platform, I'm just not sure where to start and I'd rather learn before making blind adjustments.
The rear sight numbers are in 100 of meters. "1" is 100m, "2" is 200m etc. At 25 yards you should set up at the "1" (on the small dent which is made on the left side of the front sight block) by turning both knobs together.. Then, you have to regulate the front sight post with a tool which is provided in the small, plastic, black box which came with the rifle. The front sight post is threaded and you can move it up and down for elevation like a screw. Windage is also regulated at the front sight by moving it to the left or right in a dovetail. For this, you have to release the hex bolt on front sight with a small wrench which is also provided in that plastic tool box.
Last edited:
Thanks! By the way, I received my underfolder and it is straight AF. I'm bringing it to the shooting range this weekend.
Got some more goodies on the 81M.
MOE AK grip took abit of fitting but feels rock solid
The master mount rail is topped with a PA Prism 3x
Got a Mlok TI handguard on order and then just have to figure out what kind of stock to put on it >.<
How is that micro prism attached? Looks pretty darn low....
Irish shooter
CGN Regular
- Location
- Pincourt,Qc
Underfolder finally arrived. Everything looks straight, will take it to the range this weekend and see how it shoots.
Merovingian
CGN Regular
- Location
- West Coast
How is that micro prism attached? Looks pretty darn low....
It has 3 mounting holes that interface with the side mount. The side mount has holes all down the center of it.
The PA prism came with a ton of mounting options too so I may raise it up when i replace the wooden stock.
