Ammo for Gew 88

US made commercial ammo is OK. European surplus and commercial made ammunition is not. Your bore would have to be for the spitzer bullet, if it is not you should only reload for it.
 
I hand load for my Gew 88s, but if that is not an option, I would follow what mike rock suggested with US ammo (I.e Winchester). Slugging the bore for dimensions is your best bet for these ladies.
 
Original loading was with a 227-grain .322" RN bullet at 2100 ft/sec MV (figures from TBSA-1909). Troubles with unstable powders led to chambers lifting out, which gave rise to the "neues muster" or "nm" rifles, which had much heavier chamber sections.

Gew 88/05 should be reamed for the JS loading: 154-grain .323" pointed bullet at 2880 ft/sec MV.

Note carefully that this is NOT the JsS load: that was developed strictly for anti-Tank use. It had the 196 BT slug running at over 2600.

The SmE and SmK which were used so much in War Two had 178-grain BT slugs and were very hot loadings.

As already suggested, standard Amerfican 8mm Mauser ammo is loaded down far enough you should have no troubles.

Stay away from military ammo, also from those very-hot European loadings. An 88/05 is too nice to take silly chances with, ESPECIALLY if you don't have the "nm" rifle with the heavy chamber.
 
sS German long range machine gun ammunition developed in 1918.

Ref= German Military Rifles and Machine Pistols, 1871-1945 By Gotz, Hans-Dieter

S.m.E. is a German abbreviation for "Spitzgeshoss mit Eisenkern", and means pointed bullet with an iron core, (semi AP).

S.m.K. stands for "Spitzgeshoss mit Kern" and means pointed bullet with hardened core (AP)

Both cartridges can be identified by the colour of the primer ring.
S.m.E. = blue
S.m.K. = red

SmE = http://www.mausershooters.org/k98k/8_ident.htm

SmE and Gew 88 cartridges = http://www.cruffler.com/Features/JUL-01/trivia-July01.html

The German had considerable trouble in the development and use of the Gew 88 and its ammunition.

7.92 cutaways = http://www.ar15.com/mobile/topic.html?b=3&f=16&t=657232
 
I shoot the Remington 170 factory loads and hand loads the are about the same a 170 grain bullet on 38 grains of 4895. The main reason is they are spot on for a 6 o'clock hold on a 200 yard target.
 
Back
Top Bottom