ammunition tray/holder

[MarkHFX]

I've searched hard and can't find anyone who sells ammunition trays.

308 rounds, looking for a tray that will hold 50+ for the firing line.

Any ideas?

I'm about to glue box ammo trays together.


Mark

 

[Lyallpeder]

I use the holders from factory rounds and put number 1-100 by each round so I don't get mixed up from the bench to storage to the range. Is that what you mean?

 

[MarkHFX]

That's what I'll end up doing I think.
I have seen actual single green 100 round holders with snap on lid but can't seem to find one.

 

[3macs1]

I've searched hard and can't find anyone who sells ammunition trays.

308 rounds, looking for a tray that will hold 50+ for the firing line.

Any ideas?

I'm about to glue box ammo trays together.


Mark

Hi; If you are looking for something like this I got some real nice wood ones from precision reloading in the US. They will ship to canada but costly so I have sure I max out my order every time. Trays were only 13.oo but shipping was high
take care

 

[3macs1]

That's what I'll end up doing I think.
I have seen actual single green 100 round holders with snap on lid but can't seem to find one.

They are just mtm boxes. Cabelas, wsports etc sells those but make sure you order the one for the caliper you are using they are different sizes. Put in the www.

http://###.mtmcase-gard.com/

 

[Raton57]

Buy a piece of hard wood and a forstner bit in the right size and make your own wooden tray.That is what I ended up doing when I could not find one that fit the larger calibers.

 

[heavyBullet]

There was also someone making nice ones milled from a block of aluminum with the caliber engraved on the side, cannot for the life of me remember who was selling them though. They were pricey but looked real nice and would last forever.

 

[horseman2]

I salvaged the shell holder from an MTM H50 that broke up after being dropped.

 

[Lyallpeder]

Hi; If you are looking for something like this I got some real nice wood ones from precision reloading in the US. They will ship to canada but costly so I have sure I max out my order every time. Trays were only 13.oo but shipping was high
take care

To hold the rounds between stages of reloading I use the plastic holder from a .40 pistol ammo. Looks a lot like this but free from the range

 

[MarkHFX]

Thanks for the help. I used 3macs link, then googled the product number for canadian suppliers and found exactly what I was after.

http://www.mtmcase-gard.com/products/rifle/ammo-boxes-rifle-r-100.html

M

*I did check every link at the top of CGN first

 

[KDX]

I bought one of these and like it for 17FB and .223

 

[MarkHFX]

Very nice

 

[3macs1]

I bought one of these and like it for 17FB and .223

I like that, can we ask where you purchased it?? I could use one for 223 also

 

[unstableryan]

To hold the rounds between stages of reloading I use the plastic holder from a .40 pistol ammo. Looks a lot like this but free from the range

Bingo, me too for 6.5x55, works perfect. I have a RCBS multi caliber tray but a .40 tray works better.

 

[KDX]

I bought one of these and like it for 17FB and .223

I like that, can we ask where you purchased it?? I could use one for 223 also

There was a limited edition run for Saubier members with two different styles and I chose this one. The other was a loading block style. If I can remember who was making them I will post the info for you.

 

[KDX]

You could try cncshooter.com but I don't remember if it's the same guy.

 

[3macs1]

You could try cncshooter.com but I don't remember if it's the same guy.

Thank you.

 

[KDX]

You're welcome. Please let me know how it goes as I might want another one or two.