Another AIA M10 thread. How's it shoot?

Had my AIA M10 B2 out at the range on Sunday. The trigger needs work but this rifle is not bad. I did a quick sight in with some surplus 7.62x51, groups where not great but not bad... around 2". Then I shot a several 5rd grounps with some old handloads that I had kicking around from another rifle. The load was 175gr SMK with 45gr of Varget and CCI400 primers in Hertenburger (spelling?) brass. Groups averaged 1". A few times the first three shots where in the 0.5" range but the next two would pull the group out to the 1" to 1.25" range.
 
HeadDamage said:
Had my AIA M10 B2 out at the range on Sunday. The trigger needs work but this rifle is not bad. I did a quick sight in with some surplus 7.62x51, groups where not great but not bad... around 2". Then I shot a several 5rd grounps with some old handloads that I had kicking around from another rifle. The load was 175gr SMK with 45gr of Varget and CCI400 primers in Hertenburger (spelling?) brass. Groups averaged 1". A few times the first three shots where in the 0.5" range but the next two would pull the group out to the 1" to 1.25" range.
Click to expand...

My No4 Mk4 shoots about like that too. 1 3/4 to 2 inches with FNM ball and 3/4 inch with Rem-UMC ball.
 
Believe me or not, here my 200m groups go with Remington CoreLokt 150gr (I'm going to try 200m sighted rifle for hunting this season)

673305.jpg
 
Last edited:
Believe me or not, here my 200m groups go with Remington CoreLokt 150gr (I'm going to try 200m sighted rifle for hunting with season)
Click to expand...

You have a scope on that I assume. There is no way you could see those targets at 200m. Well with my eyes for sure.
 
You must log in or register to reply here.
Back
Top Bottom