- Location
- Where the sun shines
Another succesfull Fake Silencer Project .
- Thread starter Dmitri
- Start date
it is not that hard to remove the front sight... punch out the pins,heat it up a bit,
then tighten it in the vise, and start nocking it off...while constantly heating it up. you might need some help holding a blowtorch... avoid hitting the sight, make sure you have some wood or plywood between the sight and a hammer.... once it is off cover the bare metal with some anticorosion paint.
then tighten it in the vise, and start nocking it off...while constantly heating it up. you might need some help holding a blowtorch... avoid hitting the sight, make sure you have some wood or plywood between the sight and a hammer.... once it is off cover the bare metal with some anticorosion paint.
Last edited:
guys.. i hear you.. no one likes the brake in front.... here is the thing...
when i did this i actually moded two CZs.. one mine, one my friends, so the one that belongs to my friend doesnt have the barrel clamp, so we used full length 245mm can, without any brake.. in both cases it turned out to be very solid... and although i did liked my friend's option better (no brake)... i still desided to wait till the first range trip, so we can compare the performance, and durability... So yes i agree. .. with No brake it does look ###ier ...
i'll let you guys know how both guns perform........
when i did this i actually moded two CZs.. one mine, one my friends, so the one that belongs to my friend doesnt have the barrel clamp, so we used full length 245mm can, without any brake.. in both cases it turned out to be very solid... and although i did liked my friend's option better (no brake)... i still desided to wait till the first range trip, so we can compare the performance, and durability... So yes i agree. .. with No brake it does look ###ier ...
i'll let you guys know how both guns perform........
Thank you Sir!
I like it, not so much for the "can" effect; but I like it for the massiveness. It's like a bull-barrelled match-target 858. The brake looks just fine.
Not that I'm dissing the 'can' effect, I like that too. I just might make-up something like that someday (and dream of the day our government comes to its senses and allows (encourages even!) sound moderators.
Not that I'm dissing the 'can' effect, I like that too. I just might make-up something like that someday (and dream of the day our government comes to its senses and allows (encourages even!) sound moderators.
have fun shooting! I agree that choosing functionality over appearance is the way to go.
But in a thread about screwing a foot long piece of two inch pipe on to your gun to make it look cool...I feel this principle has been totally abandoned from the get-go.
