Any Ideas?

rallen306

Member
Rating - 100%
1   0   0
Location
Sask.
Hey guys,
This summer I picked up a 12 gauge benelli nova pump to try my hand at migratory birds (which was a blast by the way :D, multiple outings with varying success). A few weeks ago I went out to blast a couple boxes of clay pigeons and get some more trigger time. During this outing I was having some difficulty with my follow up shots: when more than one round was loaded into the magazine tube it wanted to push them all back at once (rather than one at a time during cycling). I first assumed this was due to the cold Sask weather but when I brought it home/cleaned it up, it was doing the same thing. I will admit I am pretty green when it comes to shotguns so if you have any suggestions I am all ears.
 
I have a benelli autoloader. To remove shells from the magazine you push in on a springloaded lever on the inside of the opening where you load the shells. It once got some crud in it while I was hunting and didn't reset all the way and allowed the shells to come back out. I'm not familiar with the nova but you could check to see if the retaining lever is coming back into full position.
 
Back
Top Bottom