Any suggestions on a Detachable magazine

[liquid_1477]

I have been thinking of adding a detachable magazine system to my rem 700 tactical build. I cannot decide to go with a drop in system like Wyatts drop in tactical or HS Presicion drop in if I could find who sells one.

The other way to go would be Badger or Stiller that would require some inletting on the stock.

Any suggestions?

 

[Longshot]

VBull precision has a very good one as well. Ed is here on the site somewhere too.

 

[Mystic Precision]

Can offer CDI and PTG.

Jerry

 

[paperslayer]

Vbull is top drawer for sure

 

[liquid_1477]

Who usually does the inletting for these.Can this be done by a regular gunsmith? Anyone in the lowermainland of BC?

 

[Tomochan]

I have ATRS and V-BULL : both are very good. Ed (V-Bull) is in the LMD

 

[BOBXXX]

I have Badger bottom metals in 2 differant Rem 700's that accept the AI mags. One is a 300WM the other a 6.5x47 Lapua. Any of the above mentioned that accept AI mags are good. One thing to think about though is if you are carying it on your back using a standard sling. I find when carrying either rifle while hunting that the mag bites into your back and can be very uncomfortable at times. This could be solved with a differant style sling I suppose. With the newest project I'm working on a Rem 700 in 7mm Rem Mag I have ordered a HS bottom metal so that it is a flush fit. Wolverine can get the HS systems in but be prepared for a wait as HS doesn't seem to be in any hurry to ship stuff to Canada.

 

[juanvaldez]

I have a set of wyatts drop in with one 5 and one 10 round mag, can offer cdi, ptg, stiller, badger, wyatts...

 

[quaddamg]

seekins precision hands down

 

[Crashman]

I have the Wyatt, works good, was a great price. Got it from Juan Valdez at North Shore Barrels.

 

[Runt]

BC Tactical made mine. They were great to work with. Excellent communication and fast delivery etc. Takes AICS magazines and works flawlessly. I had the stock inletted and installed myself. Total cost was if I remember right just under $ 270.00 for just thw bottom metal....magazines were purchased from Wolverine Supplies for less then a $ 100.00 or so a pop if memory serves me right. I have seen the ATR bottom metal and it is very very nice and they good to deal with as well. I believe the V-Bull model has some features that do make it superior....at one time there was a model available with a lock out pin that you could activate so you could not lose your mag if you were carrying it on your back or such. I have not lost a magazine and carry mine in the bush a lot. But I can see the utility of such a feature. Good Luck!

 

[derrick1978]

ptg, dirt cheap and a cpy of the badger m5.