Anybody in metals? Need some 6Al-4V titanium.

Ah, Zuke stole my answer... its where I go for little pieces of pretty much anything you can ask for metal wise incl aluminum, brass, copper, stainless in most shapes, sizes and thicknesses... a brilliant business idea, but due to specialized nature of the place, bring your wallet. Service is generally quite good, but make sure you stay on top of them (from my experience).
If you call ahead they'll have it ready for pickup.

It's like "7-11" for metal!

http://www.metalsupermarkets.com/
 
Yes, no problem, see your PM's

Ardent said:
Need 24" of 6Al-4V Titanium, 30mm or 1 1/8" or 1 1/4" OD solid barstock. Anyone able to point me in the right direction? :)
Click to expand...

Sorry, but if I had noticed this thread earlier, I would have responded sooner.

Titanium spec # 6AL4V. There will be about a $150.00 difference between the 1-1/8" and 1-1/4" for a 24” length. I probably can get you a 24" x 1-1/8" for about $550.00 or so. If you are interested, I can get you a more exact price (it won’t vary much because I will pay about $23.00 and inch). My supplier for this stuff is not the cheapest, but he is very reliable. You are probably looking at about a one-week delivery give or take several days because of the holidays.

If you need to contact me for more information, I will send you a PM with my co-ordinates and also a link to the web site of the company. We are hardware manufacturer in Montreal with a fully equipped machine shop and deal with all metal suppliers, ferrous and non-ferrous products.

Regards
Robert
 
sounds like one hell of an expensive barrel. Hope you're cut rifling because i think you're going to be hard up to pull a button through that bad boy.
 
You must log in or register to reply here.
Back
Top Bottom