I bought my norc HP9 about a month ago, I've had it to the range numerous times and its been flawless until yesterday.
It was -15 out but also my day off. I threw on some layers and headed out to the range. The first box of 25 federal blue box target shells feed fine. As the gun got colder (I let it sit while I was playing with my sub 2000) I started to get a bunch of FTE's. The extractor was pulling fine out of the chamber but wouldn't dumb them out the ejection port. After pulling the bolt back I would have to manually remove the shell from the chamber.
I tired the same shells at home and it threw them a foot or two without a problem. My guess is the extractor plunger spring may have frozen up and it was unable to reach full range of motion? The only grease I cleaned off the shotgun before using was in the bore and the mag tube. I checked out the bolt and it didn't have any grease on it to clean off.
Anyone else experience the problem and have a fix?
It was -15 out but also my day off. I threw on some layers and headed out to the range. The first box of 25 federal blue box target shells feed fine. As the gun got colder (I let it sit while I was playing with my sub 2000) I started to get a bunch of FTE's. The extractor was pulling fine out of the chamber but wouldn't dumb them out the ejection port. After pulling the bolt back I would have to manually remove the shell from the chamber.
I tired the same shells at home and it threw them a foot or two without a problem. My guess is the extractor plunger spring may have frozen up and it was unable to reach full range of motion? The only grease I cleaned off the shotgun before using was in the bore and the mag tube. I checked out the bolt and it didn't have any grease on it to clean off.
Anyone else experience the problem and have a fix?


















































