Anyone know anything bad about the Jericho 941?

newshot

newshot

CGN frequent flyer
Rating - 100%
124   0   1
Location
GTA
I am waiting on a Jericho 941 steele frame in .45acp, but I am also leaning towards picking up a 1911. I have more then I need for a Jericho, but not enough for both.

Anyone know anything to worry about with the Jericho? I figure if it is good enough for the Israeli's it is good enough for me!

Jericho_Mid-Size_Blue_Steel.jpg
 
Thanks dudley, that is a great review, and it is great seeing it in action.

Toybuilder, I am on the wait list with Kodiac. They should be coming into Canada in a month or two.
 
I've got a 9mm versions fresh from P&D, it's the full sized steel. I don't think you can get the short or the compact here in Canada. Pretty sure Kodiak is talking about bringing in the full-sized in 45ACP.
 
Yes, we have the full sized 45 ordered. We're just waiting for the export permits to be approved.

I don't believe there are any 45 in Canada yet, as there is no FRT at this time.
 
rivetc78 said:
Can the pistol handle .45?
It was made for .40 was it not? That is why 9mm is great in a Jericho, it is over engineered.

.45 could be too much for the frame?
Click to expand...

.45 acp is a low pressure round. If it can handle the .40 why not the .45? I haven't heard of too many failures from a .45, now .40 that is a different story. For awhile I was loading my 9mm and .45 with the same charges of bullseye, the 9mm being a much smaller cartridge so that should say alot. Now I admit the .45 rounds were on the soft side and the 9mm pretty hot, but it just shows the pressure differences the 2 rounds are designed around, and the .40 is the hottest.
 
Took mine to the range yesterday, bought it new and cleaned/lubed it up for the trip. Great gun, more recoil/muzzle flip than my pervious Grand Power K100 but that was to be expected.

Had one FTF and I'm pretty sure that was my fault as loading the mags is a PIA. WOW, talk about strong springs :( Hopefully they "break-in" a little :)

Cleaning the gun is a breeze as is field stripping. #### the hammer, push slide back to line up the dots, push out slide release and the slide comes off easy-peasy. Pull out the recoil spring and out comes the barrel. Really nice set-up, very friendly.

Think this little beastly will be around a long time.
 
Kodiac was bringing it in but had problems. You can get your name on the wait list but it will be many months now ;(
 
You must log in or register to reply here.
Back
Top Bottom