Anyone know where to get a standard sized lever loop for the Rossi/Levtac 92??

Ironman6067

Ironman6067

CGN Regular
Rating - 100%
45   0   0
Location
NL, Canada
I dislike the large loop on my Citadel Levtac 92 and want to get the standard or even the 3/4 sized loop, know Steve’s guns has them but does not ship outside the US. Any one know of a place to buy a replacement loop please let me know! TIA!!:cheers:
 
Last edited:
Have either of you guys tried with the retailer first?
You know, asking for contact info for the warranty depot guys to see what can and can not be bought as oem parts.
Then there is the go2 folks in Edmonton Western Gun Parts...made model and serial number will just to get the order desk to start looking into their inventory.
Rob
 
I looked for one for over a year. Nobody could get me one including the importer, so I finally had a welder friend modify it for me and TIG weld it. I don't know if it was absolutely necessary, but I also had PWHT (post weld heat treatment) done on it as I had access to it through work.

Not sure if that's the route you want to go, but it's an option.

Before:

ranch_hand.jpg

After:

lever-b.jpg
 

Attachments

  • ranch_hand.jpg
    ranch_hand.jpg
    143.4 KB · Views: 280
  • lever-b.jpg
    lever-b.jpg
    131.2 KB · Views: 280
Orion said:
I looked for one for over a year. Nobody could get me one including the importer, so I finally had a welder friend modify it for me and TIG weld it. I don't know if it was absolutely necessary, but I also had PWHT (post weld heat treatment) done on it as I had access to it through work.

Not sure if that's the route you want to go, but it's an option.

Before:

View attachment 692775

After:

View attachment 692776
Click to expand...

Nothing like some good ole ingenuity, eh .
 
Ya the ranch hand levers are rediculously large, I looked for a long time for a standard lever when I had mine, no luck.
 
I sectioned & reformed the lever on my Rossi RH 45 Colt. My amigo TIG welded the joint in his shop, then I did the finishing & blueing at home.

ROSSI 45 RH Build.jpg
 

Attachments

  • ROSSI 45 RH Build.jpg
    ROSSI 45 RH Build.jpg
    65.3 KB · Views: 261
Just wrote them, their response was they can’t compete with the cost direct from Rossi and sent me to the Rossi website, going to inquire with Rossi if they can get one up North and if their R92 levers will fit the Citadel.
 
Ironman6067 said:
Just wrote them, their response was they can’t compete with the cost direct from Rossi and sent me to the Rossi website, going to inquire with Rossi if they can get one up North and if their R92 levers will fit the Citadel.
Click to expand...

I spoke to Rossi USA last week.

They wont ship to Canada and suggested I call the importer for Rossi in Canada which is Gravel Agency. I have yet to try them.
 
Since Stevesgunz no longer ships parts to Canada, here are a couple of sources which may be of use: Shoprossi.com. Everygunpart.com.
Worth a try.

Note: Shoprossi claims to ship anywhere in the world, subject to some restrictions

everygunpart.com only ships to U.S. addresses. If you have a US postal box, that may work, too.

As already mentioned, Gravel Agency may be able to get the part.
 
Last edited:
There is a lot of "may" in this thread and no "can" or "does".

Has anyone successfully sourced a regular sized lever loop for their R92? The oversized loop is the only thing I dislike about my R92.
 
Rossi rifles are completely unsupported in Canada. Oh, the importer Gravel will sell you one, and will fix it on warranty if it breaks within one year, after that you're out of luck. Zero customer service. Nobody should buy a new Rossi. Gravel Agency doesn't deserve Canadian customers.
 
Nobody ever puts the old one back on. Cut it, there's got to be a good craftsman on the rock close to you, somewhere.
 
You must log in or register to reply here.
Back
Top Bottom