K1LLswitch
CGN Regular
- Location
- Calgary, Alberta
Newb Question - what is the difference between the x5 and a regular 226 elite stainless?
Thanks
Thanks
Anyone own a Sig X-Five?
- Thread starter iamcanadianeh
- Start date
Main difference is a 5" barrel on the X5, it is also a heavier barrel. X5 comes with LPA SIGHTS, adjustable sa-or a da/sa trigger on the allround, magwell and probly a few other options that Im forgetting at the moment.
K1LLswitch
CGN Regular
- Location
- Calgary, Alberta
I shoot PPC with mine and I really like the LPA sights since I can sight it in and set the sights for 7,15,25 and 50yd that we shoot to. The only sight that I may prefer would be aristocrat sights and the X5 can be ordered with them.
The X5 Tactical appears to have a standard SIGLIGHT dovetail sight that could easily be changed.
SIG X-Five
I have the "Allround" model in 40 cal. I also have a .357 SIG ported barrel that I bought from Barsto.
I ungraded the gun with a flared mag funnel and Nill grips and then sent it to Bruce Gray for his X-Five special package. Beside action work, the frame was machined to reduce non functional weight.
The gun is big, heavy and superbly balance so it absorbs recoil and muzzle flip.
My only concern if with the natural stainless finish. After Gray Guns work, the entire pistol was refinished which removed several small blemishes. After a short period of use, I have even more shiny spots. This is the sort of thing that drives me crazy so I'm considering sending the gun to Robar for a complete NP-3 Plus treatment that will toughen up the finish and reduce or eliminate the need for lube.
The gun is beautiful and a great shooter. Dressed up, it attracts a lot of attention. GrayGuns work improved the already exceptional gun so the only thing left to do is take care of the finish issue that probably wouldn't bother more reasonable people.
I have the "Allround" model in 40 cal. I also have a .357 SIG ported barrel that I bought from Barsto.
I ungraded the gun with a flared mag funnel and Nill grips and then sent it to Bruce Gray for his X-Five special package. Beside action work, the frame was machined to reduce non functional weight.
The gun is big, heavy and superbly balance so it absorbs recoil and muzzle flip.
My only concern if with the natural stainless finish. After Gray Guns work, the entire pistol was refinished which removed several small blemishes. After a short period of use, I have even more shiny spots. This is the sort of thing that drives me crazy so I'm considering sending the gun to Robar for a complete NP-3 Plus treatment that will toughen up the finish and reduce or eliminate the need for lube.
The gun is beautiful and a great shooter. Dressed up, it attracts a lot of attention. GrayGuns work improved the already exceptional gun so the only thing left to do is take care of the finish issue that probably wouldn't bother more reasonable people.
iamcanadianeh
CGN Regular
- Location
- Vancouver Island
All these good reviews are making me really excited to take mine for a spin
- Location
- Calgary, Alberta
They're overrated IMO. I've tried a few in 9mm and one of the SAO ones in .40. At the time I was after an All-around in .40 but I couldn't find one so I got a regular P226 SL with the stainless frame and put a 5" barrel from Bar-Sto in it, plus I replaced the sights and grips and did a trigger job on it. Worked out to around $1,000 less than an All-around and I suspect given the Bar-Sto barrel it's at least as accurate, if not more so.
You give up some weight but frankly I think the X-Five is too heavy, my P226 SL with a 5" barrel isn't exactly light.
Not a factor in Canada, but the mags also only hold 14 rounds whereas most people in Standard Division have 16+ in their Paras, SVIs and STIs, which also stinks when you consider the price you're paying.
Didn't like the safety either on the single-action model, not positive enough for my liking.
You give up some weight but frankly I think the X-Five is too heavy, my P226 SL with a 5" barrel isn't exactly light.
Not a factor in Canada, but the mags also only hold 14 rounds whereas most people in Standard Division have 16+ in their Paras, SVIs and STIs, which also stinks when you consider the price you're paying.
Didn't like the safety either on the single-action model, not positive enough for my liking.
Holsters X-Five
I have BladeTech holsters for both my X-Five and my SIG Equinox. I found it easy to deal with BladeTech and they have been very quick to respond to my emails. I was considering another of their holsters for a NightHawk Custom 1911 that is being built for me. It is a Predator II model with unique muzzle configuration. I emailed BladeTech asking if they could fit that gun and got an affirmative reply in a few hours. Shipping costs when dealing with them directly are pretty heavy. Ellwood Epps is in the process of becoming a distributor for the BladeTech line which should work out very well as Ellwood Epps is also great to work with. The holsters are first class and look good too. I particularly like having several options for hanging them from my belts. I shoot IPSC which involves a lot of holster activity. I'm not terribly concerned about holster wear with the SIGs but decided to buy a CR Speed rig for use with the 1911 to do my best to avoid wear with that gun. I've tried this setup with the P-226 and believe it's the best choice for IPSC and the issue of damage to the finish.
I have BladeTech holsters for both my X-Five and my SIG Equinox. I found it easy to deal with BladeTech and they have been very quick to respond to my emails. I was considering another of their holsters for a NightHawk Custom 1911 that is being built for me. It is a Predator II model with unique muzzle configuration. I emailed BladeTech asking if they could fit that gun and got an affirmative reply in a few hours. Shipping costs when dealing with them directly are pretty heavy. Ellwood Epps is in the process of becoming a distributor for the BladeTech line which should work out very well as Ellwood Epps is also great to work with. The holsters are first class and look good too. I particularly like having several options for hanging them from my belts. I shoot IPSC which involves a lot of holster activity. I'm not terribly concerned about holster wear with the SIGs but decided to buy a CR Speed rig for use with the 1911 to do my best to avoid wear with that gun. I've tried this setup with the P-226 and believe it's the best choice for IPSC and the issue of damage to the finish.
iamcanadianeh
CGN Regular
- Location
- Vancouver Island
I just tried mine out for the first time. DAMN does this thing shoot!
I have both a Sig X5 and X6, Level 1s, in 9mm. Bought the Sig X5 new and got a good deal on the X6 used. Both now have more then 5000 rounds thru them, and not one misfire or breakage of any type. The X6 is definitely the most accurate handgun I have shot, even better then my STI Targetmaster, although it's close. The X5 does seem like more fun to shoot though as it's better balanced. I like them so much I have a X6 Supermatch on order. Can't go wrong, they are an amazing pistols!
- Location
- Calgary, Alberta
The problem with the X5 I think is that it's too heavy with the stainless frame and aluminum frames get dinged up too easily and/or wear out too quickly. Pretty bulky gun. The .40 version is a good idea though because it makes major PF much more easily because of the longer barrel than a regular P226.
I never understand why so many X5 variants are on the IPSC production division list given that they've got adjustable sights. I've got a "P226 Sport II SL ohne Schiene" (without barrel weight) and that's on the IPSC production list as well, quite obviously it is a target pistol.
In 9mm though I think it makes more sense because it's a bit more handy than the X5.
I never understand why so many X5 variants are on the IPSC production division list given that they've got adjustable sights. I've got a "P226 Sport II SL ohne Schiene" (without barrel weight) and that's on the IPSC production list as well, quite obviously it is a target pistol.
In 9mm though I think it makes more sense because it's a bit more handy than the X5.
I know everyone has their own idea of the perfect pistol, I personally love the weight and feel of the heavy frame and feel like it's more accurate for me then polymer guns. I think that everybody gets used to what they are familiar with. It is true that it does feel quite a bit different then the polymer gun class and everybody who picks it up does comment on the weight!
rc30 - when you did your E2 conversion for the x5ar, did you have to swap out the decocker?
[/URL][/IMG]
Yes I did swap out the decocker
