Anyone recognize these RCBS parts?

[TedNugent]

I don't recall buying these, or if I did, why.
I use Redding dies, and already have a micrometer seating die, and the other one
I don't know at all what it's for.

This one looks to me like a mic for a seating die.
Would it be a universal fit? or RCBS only seating dies?

 

[silverfoxdj]

Any numbers on the packages?

 

[TedNugent]

Nada, was kinda surprised at that.

 

[curseyou]

Too weird. I was asking myself the same thing a week or so ago with the top bag. I still don't know. Hope this thread figures out the mystery.

 

[yodave]

those are the replacement cutter assemblies for the hand held neck turner..........

 

[TedNugent]

I have to take a look, awhile back I bought an RCBS case neck trimmer, the top pic has a piece that looks like a locking ring with a set screw, have to take a look at what came with the trimmer and see if that's where they came from.

 

[yodave]

I have to take a look, awhile back I bought an RCBS case neck trimmer, the top pic has a piece that looks like a locking ring with a set screw, have to take a look at what came with the trimmer and see if that's where they came from.

you are correct............

 

[TedNugent]

you are correct............

Ahh, thanks very much!

1 down 1 to go!

 

[yodave]

both of the packages you pictured are for the neck turner, the first package is the cutter and lock nut, the set screw for the mandrel and the set screw that locks the cutter, the second package contains the micrometer adjustment knob for adjusting the depth of cut so you achieve the right neck thickness your after.........

 

[yodave]

ht tp://www.brownells.com/userdocs/products/p_749006898_1.jpg

 

[TedNugent]

Great, thanks again.

 

[MLine052]

The top picture looks like my RCBS primer seater sleeve and set screw (if you call it that). I prime small and large primer on the press. I could be wrong but thats what it looks like to me. The bottom pics????