AR-15's

I'm sick and stuck in the house, so I'm going crazy with the camera.

And here is the Canadianized version.:rolleyes::p
canadiansopmod.jpg

Man, to have that dual Ar-15 drum pinned to five is a crime! Not the other way around! Is one side pinned to 2 and the other to 3?
 
No. Both sides have to move, so I pinned one side and it prevents both tracks from moving any further.

In actual fact, I also utilize a loose dummy round as the last round fed, because if I use a live round and the bolt goes forward on the linked Beta dummy round, it gets gouged. Therefore the loose dummy round prevents the damage. Soooooo, in reality it's a 4 round Beta mag.:rolleyes:
But it may save the life of a child some day, therefore I sleep better.
 
Zombie Slayer

LMT145LT15-7hgAimpointM2_WilcoxS-5.jpg


LMT145LT15-7hgAimpointM2_WilcoxS-4.jpg


LMT145LT15-7hgAimpointM2_WilcoxS-3.jpg


LMT145LT15-7hgAimpointM2_WilcoxS-2.jpg


LMT145LT15-7hgAimpointM2_WilcoxS-1.jpg


LMT145LT15-7hgAimpointM2_WilcoxSOPM.jpg


LMT Defender2000 Lower (L7E2A)
LMT Defender2000 Upper with M4 feed ramps
14.5" M4 profile Barrel with 1/7" twist, chrome-lined
SEI Vortex G6 flash suppressor
LMT 2stage trigger
LMT enhanced S/A BCG
LMT charging handle
LT15-7 7.0" handguard with KAC and MagPul XT rail panels
Magpul MIAD grip with B2 backstrap and integrated enhanced trigger guard
LMT SOPMOD stock
TD VFG BGV-MK46
Troy Industries BUIS
CF style front sight post
Aimpoint CompM2 4MOA
Wilcox M68 M2 mount
SF M951XM07
MI Heavy Duty swivel
BFG VCAS
MagPul PMag

Unprofessionally built by Robert B., Trevor A., Grolsch, and Heineken.
:canadaFlag:
 
myguns.jpg

Latest setup of my AR:
- Stag internals and lower
- Magpul UBR
- MAID grip
- Magpul trigger guard
- KNS pin set
- 10.3 inch 5.56mm Stag upper complete with bolt group
- PRI Gasbuster
- Vltor flash hider
- KAC RAS with covers
- TD cut down vert grip
- Cut down carry handle rear site
- Aimpoint T1 Micro with Larue mount. This is the heat!:dancingbanana:
- KAC front sling mount
- BFG padded sling
other upper:
- 16 inch CMMG 5.56mm mid-length gas
- Larue low pro gas block set screwed and pinned
- Larue 12 inch free float rail
- Troy front and rear flip up BUIS
- Surefire Scout light
- KAC panels
- Stag upper and bolt group
- PRI Gasbuster
- Millet DMS-1 1-4 scope. Knock off Larue 1.93 mount. I couldn't put a Millet in a real Larue, just didn't seem right.:D
- ACOG TA31F just in case.;)
- and finally some of my Pmag collection.;)
Glock 17:
- Gen 3 gun
- Trijicon night sights
- Titainium guide rod
- grip modifications and grip tape added
- Surefire X200
Gerber Prodigy Knife. Smaller version of the LMF.

Hoddie
 
IMG_0025-1.jpg


Colt A2 Gov't - KAC RAS M5 (spare - maybe wife#2:p): SA M1911
LMT 14.5 - LT15-7 (mine): Sig P226R
LMT 14.5 - Troy 7" (son#1): Sig P226
LMT 10.5 - KAC RAS (wife#1): Glock17
LMT 10.5 - KAC RASII (son#2): Glock17

Still have to get another two RDS, one mount, one light, and a better sling for the bottom platform.
 
Back
Top Bottom