Ar-180b " let's see your rig"

[Armedsask]

Ambi, in the trigger guard. I have the basic design figured out, just need to get the details worked out and make it easy/cheap to build.

 

[MarkArma180]

Hey guy's, Here's a vid of my first idpa match. Was alot of fun. Did well in stage one which was 200 yrd. and 100 yrd targets. Then stage two was various targets from 25 to 30 yrds which also did very well at except for my time killed me in stage two for I had a ftf third round in. Of course ran fine the rest of the day and as rare as it ever happens in my 180b it had to happen while the timer was going. Anyways lots of fun and still managed 4th place.

 

[Hokus Grey]

Just glad to see you out doin' your thang!

 

[Urban_Ops]

Ok, I will play.

 

[MarkArma180]

Have we heard any updates on release dates or any pics floating around of the new 180?

 

[gjgudqkqh]

just got my used ar180-b and where can i pick one of this MI rail??

 

[fnrob]

just got my used ar180-b and where can i pick one of this MI rail??

Try Wolverine Supplies. They've carried them in the past, and even if they don't have them in stock at the moment, they may be able to order one in for you.

 

[Craig0ry]

Nothing to fancy, Aftermarket A2 stock, and a 50$ red dot

 

[fnrob]

Nothing to fancy, Aftermarket A2 stock, and a 50$ red dot

She looks good. Sometimes, it's just as good to follow the KISS principle than to bolt on all sorts of parts you may not have a need for. YPMMV.

 

[MarkArma180]

Member seeing those enhanced 180b with flat top uppers and flip up front and rear sights did any of those ever make it up to canada.

 

[Guill]

I have a few failure to eject the round with mine, round jam between bolt and ejection port. It is normal ?

 

[MTB2.5]

Is Armalite coming out with a new version of the AR-180?

 

[fnrob]

There's rumors of a new version being designed with an aluminum lower and integral picatinny rail, but Armalite's been pretty silent on the issue as of late. At this point, I'm not holding any hope of seeing new ones any time soon.

 

[MTB2.5]

There's rumors of a new version being designed with an aluminum lower and integral picatinny rail, but Amamlite's been pretty silent on the issue as of late. At this point, I'm not holding any hope of seeing new ones any time soon.

ah well. Only time will tell i guess then. And hopefully it will be non-restricted.

 

[johndeeretimex]

dose anyone know where I could get a rail for the ar180b that I could put a handle and a light on it?

 

[Urban_Ops]

dose anyone know where I could get a rail for the ar180b that I could put a handle and a light on it?

Are you looking for something like this?
Made by StormWerkz

 

[MarkArma180]

Hey Urban ops, How do u like the magpul stock on your 180b? and is that the stormwerkz stock adapter, if so is it solid. No play in the adapter.

 

[Urban_Ops]

Hey Urban ops, How do u like the magpul stock on your 180b? and is that the stormwerkz stock adapter, if so is it solid. No play in the adapter.

It is a StormWerkz adapter which is very solid, The magpul is the mil-spec MOE. My favorite stock to date.
The cheap scope is on its way out once I get a vortex or similar red dot.

 

[MarkArma180]

sweet looking rig urban ops. Also is adapter made to just thread in a buffer tube or is there a rear plate which could be swaped for one with a single point sling connection?

 

[Urban_Ops]

sweet looking rig urban ops. Also is adapter made to just thread in a buffer tube or is there a rear plate which could be swaped for one with a single point sling connection?

This is the type 4 adapter which has a full profile and uses the plate.
Any of these sling plates made for an Ar-15 will work.