ARMS #18 mount - where to find a replacement bolt

[w squared]

I need to replace the bolt from the left side of my ARMS #18 mount.

Does anyone know of an ARMS dealer or gunsmith likely to know which piece of hardware I am talking about and also be willing to sell me one?

Alternatively if anyone happens to know diameter, thread spec, and length I am sure that I can pick a grade 5 replacement at an industrial supply house in the next week.

 

[gnmontey]

Is it the mount to receiver bolt you are after?

Try FABSPORTS, or Bassett Machine,

Else

I have some cap screws that I purchased from an Specialty Industrial Bolt Supply store that should work (They scratched their head over the promag bolt that I brought in for quite some time, but ultimately came up with a pretty good substitute) .

PM Different, or Hungry; They will be able to tell you what the receiver bolt specs are.

 

[wce323078]

wolverine supply will have them or can get them,I had to get one for my arms 18

 

[wce323078]

and you won't be able to find any bolts for that at any hardware store even the taps are special order thread size is 12-32

 

[wce323078]

If I remember right the torque stated from arms is 90 inch pounds.I find that that is too much,I recieved my new bolt cleaned up the threads on the reciever installed the mount and torqued to spec and I can tell from the feel that upon removing,if I do remove it its going to strip again.so I am going to have to order a other spare mounting bolt too

 

[w squared]

FabSports it is. They offer a thread chase tool, replacements bolts, and a tap.

Look like a one-stop-shop for making sure that your scope mount will maintain a zero.

Well, that and some loc-tite.

 

[majormarine]

what about the piece that replaces the charging clip metal? is there any replacement part for it?