Asena Semi ZR7 Magazine Plug

[Roadblock007]

Anyone know how to install a magazine plug in one of these? I can't figure out how to get the spring retainer to come out of the end.

Thanks,

RB

 

[mrbishi]

ive only had a quick look at mine but it seems like you need to dremmel out the lip that bends inwards at the end of the magazine tube under cap.

 

[corwin-arms]

You do not need to remove the magazine part from the tube. There is a hole inside retainer, you need to put magazine plug through this hole. It is accessible without need to disassemble the magazine

 

[Roadblock007]

You do not need to remove the magazine part from the tube. There is a hole inside retainer, you need to put magazine plug through this hole. It is accessible without need to disassemble the magazine

Please explain a bit better. Are you talking about the small hole in the spring retainer at the end of the tube? Pictures would help a lot.

RB

 

[corwin-arms]

Yes small hole. Please send me email info@corwin-arms.com . I will look in our parts bin for correct plug

 

[Suther]

Here is mine. As stated, it goes into the small hole in the end of the magazine:

 

[Woody-to]

I just cut a 1/4" dowel to size and dropped it in the hole. I got the dowels from the dollar store in the craft section.

 

[brybenn]

I use the dowel for mine. Keep cutting until it will take 2 3" shells and not 3 2-3/4"