Assembling a Lee custom order to BC LML

Jimothy

Jimothy

Regular
Rating - 100%
1   0   0
Location
British Columbia
Howdy I’m planning to make an online order from Lee to get some custom seating plugs for 6.5 and 7mm ELD bullets.
I thought I’d put out the offer if anyone wants to piggyback the order to share on shipping into the BC Lower Mainland. Let me know by end of July.
Cheers
Jimothy :)
 
is this a Lee item or a one-of special build for you? I had tried to get info awhile ago but no luck
did you have troubles with the Lee original seater dies?
The newer Lee Micro-adjust seater looks good, but could not say whether the seater was any diff than in the original seater
 
boxhitch said:
is this a Lee item or a one-of special build for you? I had tried to get info awhile ago but no luck
did you have troubles with the Lee original seater dies?
The newer Lee Micro-adjust seater looks good, but could not say whether the seater was any diff than in the original seater
Click to expand...
Lee will custom make the plug for the seater die to fit any bullet for $10usd. You order it and then mail them a sized case and sample bullet. The plug that comes with the die set is a sharp angle and leaves a ring on my bullets. https://leeprecision.com/custom-bul...ucPb52nDtG3aT_zeScytxB_EtD3bp6NVGwEyGRKkcEOKJ
 
I had that complaint with my 6creedmoor die, I suggested it was defective or inappropriate for the 108 eld-m, sent it back for inspection with brass and bullets, all they did was a slight polish it so the contact is still a thin line only, their Engineer was apparently ok with that

If you order, you might want to be real specific about the shape and contact that you want so don't get an 'its good enough' fit
 
You must log in or register to reply here.
Back
Top Bottom