Here's the rub on what Dlask can and will not do for you
although, it should be mentioned that I do not speak for Joe himself, but the following has been my experience while dealing with him for M14 type work.
they do not have the M14 specific tools for take down of the rifle, I generally get a phone call if this needs to be done to an m14 type rifle they need debarrelled, or Joe simply refers guys to me for such work..
Dlask can cut and thread your barrelled action with the barrell on..... BUT Joe and I will both tell you, you get a much more concentric (to the bore) finished product if the barrel itself is chucked up in the lathe.
Dlask will NOT modify a norinco..... or usgi flash hider unless YOU provide the tap required as generally due to the hardness of the flash hiders..... the tap is done after one or two of these modifications. It took some convincing on my part, but under those circumstances are the only way he will bother with that modification
My business is seperate from Dlask, but we cooperate and share our services back and forth when it comes to M14 related work. He has supported my endeavors every step of the way.
At M14Doctor, we provide quality services at competitive prices and the best of all, you are supporting a CGN dealer at the same time
