AT-15 Pistol Magazine

[john frusciante]

i got two and had to cut the window out in order to lock in on my xcr, but its most likely a problem with my gun...doesn't seem like any mags work properly in it

Has anyone tested these in an XCR (without modification)?

 

[Moe]

Works fine unmodified in the Norinco M4

Moe

 

[DILLIGAF]

They cycle great in the STI lower without any modification.... They fit just like the M3's

 

[enefgee]

Where'd you get the hammer? - does STI ship with that as standard????

 

[DILLIGAF]

Nope found it on ebay....

 

[mildot]

OK, so I found some time, and sat down to take a closer look at the mag lock up. Used an X-acto knife to carefully elongate the recess for the mag. After taking a few small slices the mags lock up and works, no worries.
Now off to the range to test?

 

[ryanthony]

sweet thanks

 

[speedjunkiesracing]

Figured out how to fix these mags. http://www.canadiangunnutz.com/forum/showthread.php?943104-ATRS-AT15-10-Round-mag-FIX

 

[kombayotch]

Figured out how to fix these mags. http://www.canadiangunnutz.com/forum/showthread.php?943104-ATRS-AT15-10-Round-mag-FIX

I tested mine again after putting a bit of wax pencil around the lips and releiving anywhere that still touched the bolt carrier. I didn't need to do that on mine for them to stay in.

Haven't fired them enough to say how reliable they are.

 

[NaviDave]

Received them yesterday (super fast shipping).

...

Is an FRT listing available? I would like to print out a few copies (just in case).

It was nice to call, have someone pick up the phone and take my order right there. Thanks ATRS!

 

[BenL]

Received them yesterday (super fast shipping).

Yup - they fit 10.5 rounds (no modifications necessary - or possible).

Is an FRT listing available? I would like to print out a few copies (just in case).

It was nice to call, have someone pick up the phone and take my order right there. Thanks ATRS!

Why not call Rick or Dustin back and ask for the pistol FRT number?

 

[kingair]

Nothing but problems. Kept double feeding in a DDv5. Even after opening up the the window.

 

[C77]

I used mine all day the ORA SR match. No issues. Needed a very minor file down at the back to clear the carrier in my RRA.

 

[kombayotch]

Mine worked at the SR match too.

 

[kingair]

What were you using? I had 5 mags and all 5 had issues. Wasn't cool during a match!

 

[mildot]

Mine worked at the SR match too.

How did they eventually work in your STAG lower? I had to trim the window on mine to get them to "lock up"

 

[r_taylor]

Has anyone tested these in an XCR (without modification)?

No problem with my XCR. Fits and works flawlessly.

 

[r_taylor]

What were you using? I had 5 mags and all 5 had issues. Wasn't cool during a match!

Any chance it could be your gun? I have tested them in 10 of my AR's and my ACR, XCR and TAR21... No issues in any of the guns.

 

[kingair]

I've used pmags & LAR-10's on my DD without a hitch. Tried these mags and had nothibg but problems during a match. Had to go back to PMAGs & Lar-10's. One thing I did notice is how thick the feed lips are on the AT-15 Mags.

 

[r_taylor]

I've used pmags & LAR-10's on my DD without a hitch. Tried these mags and had nothibg but problems during a match. Had to go back to PMAGs & Lar-10's. One thing I did notice is how thick the feed lips are on the AT-15 Mags.

Strange.