ATRS AT-15 Mag Question

[Gypsy613]

Hey Guys

I recently grabbed a few ATRS AT-15 mags from a guy on the forums and I knew I was taking a chance with them depending on which Gen they were and as it turns out I`m having the common feeding issue with them. When a round is chambered the projectile is pushed back into the case rendering the round useless. I`ve read that this was a possible issue but can`t seem to find a fix online.

If anyone had this issue and found a fix could you please inbox me

Thank you in advance

R

 

[Neil Burke]

My fix was return for replacement. Alternatively, you can down load them and they'll run. The ones I had the magic number was 8 rounds.

 

[Carson]

When these were first released, there were some that had excess flashing on the leading edge.
Trinimon posted some pics of the issue in this thread;

https://www.canadiangunnutz.com/forum/showthread.php/1226261-AT-15-Mags/

Check there and compare your magazine to see if this is the issue.

 

[Dexter Morgan]

Are these mags still being made?

I haven't seen any for quite some time.

 

[edgy]

My fix was to sell them, they absolutely would not function properly in my Norc's, I ended up grabbing a few MFT 10's, they work with no issues

 

[Gypsy613]

When these were first released, there were some that had excess flashing on the leading edge.
Trinimon posted some pics of the issue in this thread;

https://www.canadiangunnutz.com/forum/showthread.php/1226261-AT-15-Mags/

Check there and compare your magazine to see if this is the issue.

I`ll check when I get home from work but that looks very familiar.

Thank you for the links

 

[Gypsy613]

Are these mags still being made?

I haven't seen any for quite some time.

I spoke to the company not too long ago and they were going through some issues with the manufacturer and didn`t look too promising then.

You could always e-mail and ask them

R

 

[Trinimon]

When these were first released, there were some that had excess flashing on the leading edge.
Trinimon posted some pics of the issue in this thread;

https://www.canadiangunnutz.com/forum/showthread.php/1226261-AT-15-Mags/

Check there and compare your magazine to see if this is the issue.

Damn, I totally forgot I wrote that up. I should have bough a dozen mags. lol

 

[DILLIGAF]

Are these mags still being made?

I haven't seen any for quite some time.

I dont think so, witch is very unfortunate :-( They work great in my X95 and ACR

Im starting to switch to XCR pistol mags coupled with a magwedge, That seems to be a good solution ATM and I dont want to invest anymore money in Beowulf mags for obvious reasons

 

[Trinimon]

Hey Gypsy, here's the pics of the modded mags. The one on the right I've used a bit more and the lips opened out to where they are now but it feeds reliably. The one on the left I've probably only shot a half dozen times.

 

[Gypsy613]

Hey Gypsy, here's the pics of the modded mags. The one on the right I've used a bit more and the lips opened out to where they are now but it feeds reliably. The one on the left I've probably only shot a half dozen times.

Thank you very much

R