Baahhhhaaaahahahahah - Barrie 3 GUN Rifle results

O

omen

CGN Ultra frequent flyer
Rating - 100%
22   0   0
Location
GTA
Hhahahahhahahahah... I WON Std Rifle!?!?!?!? :rolleyes: With a 9mm Ruger PC9 !?!?!?

Actually, based on what I saw, this is more the result of (a) the 10 round AR mags having some issues, and (b) no shots at 100m+... than any great rifle shooting ability on my part.... But I did beat BMW on a rifle field course (#1), whoa, that's like beating Mike B on a pistol stage!! Cool!! (even if the result was a fluke, more than anything else) :rockOn:

Hehehehe... ;)
 
stormbringer said:
Lets see you repeat at EESA!
Click to expand...

Alas I'll be in Smith Falls...

the 10 round problems - seemed like a lot of people were having some issues (I didn't see - jams, not seating, etc - there was a lot of fighting with the gun during a stage...)
 
omen said:
Alas I'll be in Smith Falls...

the 10 round problems - seemed like a lot of people were having some issues (I didn't see - jams, not seating, etc - there was a lot of fighting with the gun during a stage...)
Click to expand...

Ahhh....ok. I suspect that some of these same folks would be "fighting with the gun" even if they were using "regular" 5/20rnd mags. ;)
If you don't shoot your AR regularly in matches, neither the shooter nor the rifle ever seem to get sorted out to shoot quickly and reliably.
 
Six Star said:
If you don't shoot your AR regularly in matches, neither the shooter nor the rifle ever seem to get sorted out to shoot quickly and reliably.
Click to expand...
+1 - Learned that the hard way when we started our 3 guns down here a few years back.
 
Six Star said:
What issues...?
Click to expand...
Depending what AR you have, they need to be hit real hard to seat them. Then the Tac-pul bottoms break apart in your hand and you get stabbed by broken plastic. They need to be tuned for some rifles, like any other competition mag. I recommend the mags without the Tac-pul bottoms like BMW was using. I will shortly have a bottom (baseplate and extension)finished out of solid delrin plastic that will roughly mimic the feel of a 20 rounder. Any interest out there?????
If so, I'll run them off on the CNC. Let me know.
 
You must log in or register to reply here.
Back
Top Bottom