Ballistic Plates Incoming

stone25 said:
If you guys bring in steel level IV with a heavy anti spall coating they would likely be a hot seller given your current pricing!
Click to expand...

We are a little hesitant as the sheer weight of Level IV steel would be a factor. The Level III+ we have is already over 3kg, and the level IV would probably top out at over 4.5kg. In addition these would have to be custom made as the factory only makes level III+ at the moment.
 
AITacticalSolutions said:
We are a little hesitant as the sheer weight of Level IV steel would be a factor. The Level III+ we have is already over 3kg, and the level IV would probably top out at over 4.5kg. In addition these would have to be custom made as the factory only makes level III+ at the moment.
Click to expand...

4.5 kg per plate for level IV sounds about right, perfect for training. There are Canadian made ones available but the price point is quite a bit higher.

Still interested in your lighter options as well. Looking forward to watching your tests!
 
Why would you want to carry 20lbs just in plates? That is beyond hard on the body. Absolutely not worth the slight savings.

Shawn
 
pure.black.xiii said:
Bringing in lots or do we need to hurry and buy them ASAP? Really interested into the level III+
Click to expand...

We are a small company and for this first order we are only going to bring in pre-orders and potentially a small inventory. If you want to guarantee getting the plates, pre-ordering a set would be the best way to go. Also we are not going to be setting a high pre-order price, we have decided on a 15% up front amount so to reserve a pair of steel plates it will only run you about 14 dollars.
 
stone25 said:
4.5 kg per plate for level IV sounds about right, perfect for training. There are Canadian made ones available but the price point is quite a bit higher.

Still interested in your lighter options as well. Looking forward to watching your tests!
Click to expand...

We would consider bringing them in but to do a custom run we would need at least ten people committing to buy a pair of these plates before we could approach the factory. If we can get that commitment we are more than happy to try and bring them in.
 
AITacticalSolutions said:
We are a small company and for this first order we are only going to bring in pre-orders and potentially a small inventory. If you want to guarantee getting the plates, pre-ordering a set would be the best way to go. Also we are not going to be setting a high pre-order price, we have decided on a 15% up front amount so to reserve a pair of steel plates it will only run you about 14 dollars.
Click to expand...

When and where do I send it?! :) THANKS!!!
 
After following this thread from the beginning, I'm finally replying just to subscribe to hear about updates
 
You must log in or register to reply here.
Back
Top Bottom