I thought I would toss this one out for a few to read here. The BCRA AGM is this weekend and I have submitted a written motion calling for the formal adoption of "F-Sporter/Factory" class.
Some background...
BCRA (rightfully-so) has adopted the ICFRA spec targets for its competitions. KTSA has followed suit. (Not sure where MRGC sits on this yet). The short range target is extremely challenging at a mere .4 MOA.
ICFRA has decided not to adopt an F-F (Farky) class, and the previous F-Restricted will revert (in name only ) to F-TR.
What this means is that F-Class has an open class and a 308/223 class open to any bullet weight, but success in each of these classes will require highly accurate equipment. Highly accurate equipment requires a committment of significant money and dedication to the sport, and franky some shooters - especially those in other disciplines - may not want to dedicate a rifle suystem specifically to shooting the occasional F-Class match, particularly if they aren't even sure they want to continue with it.
What is lacking is a sanctioned entry-level class where newcomers can enjoy the sport using their factory Remington, Savage, Tikka etc. rifle, and be truly successful, in other words, actually have a chance to win in a class where they are on an equal footing equipment-wise.
These shooters will shoot at the double-sized TR target, so they should be capable of success within the technical limitations of an unmodified factory rifle shooting good ammunition.
The technical definition has been paraphrased and condensed here, but essentiall, the rifles consist of:
Any factory bolt action repeater with an unmodifed action, the original factory barrel (as identified by the presence of the factory stamp on the barrel itself), a factory trigger (that MAY be adjusted to any safe weight) but in any stock. Any sight is acceptable, any front rest/bipod, and rear bags may be used. No part of the rifle with the exception of a front bipod may touch the ground during firing, and no devices that connect the front and back of a rifle (shooting cradles) may be used. total weight will be restricted to 12 pounds including all attachments.
This weight restriction will exclude some of the questionable "factory" rifles such as the TRG, the AI, PGW and other purpose-built sniper weapon systems.
Any centerfire factory chambering up to 338 Lapua (within the acceptable ammo allowed on the range used) but no muzzle brakes or compensators may be used.
Exclusions include any purpose built singe shot factory "target rifle" such as the XR100, the Savage F-TR and F-Class rifles, and any custom shop rifles (ie: 40X) Exceptions to the single shot rule include Ruger #1 and TC Encore rifles; these may be used.
There is a "Spirit and intent" clause in the proposed rules that stipulates that the purpose of this class is to create an entry level class. It is intended to attract new shooters, and not all exceptions can be included in one definition, so ultimately the decision as to an acceptable rifle is up to the match director using the "Sprit and Intent" guidelines.
Now, in the last year there was interest in a "Tactical" class. I fully supported the idea, but when it came to holding a match that incorporated a tactical class and giving 6 months of advanced notice and regular publicity here, I got no entries at all. I guess this was one of those ideas that looked better on paper.
I feel that the factory class will provide tactical shooters the opportunity they were looking for. If they are using custom barrels, actions, and equipment then this would represent a rifle with capabilities consistent with either the open or FTR classes. If their equipment is factory, then they can still compete in F-SP class and do well.
Something to ponder....
Some background...
BCRA (rightfully-so) has adopted the ICFRA spec targets for its competitions. KTSA has followed suit. (Not sure where MRGC sits on this yet). The short range target is extremely challenging at a mere .4 MOA.
ICFRA has decided not to adopt an F-F (Farky) class, and the previous F-Restricted will revert (in name only ) to F-TR.
What this means is that F-Class has an open class and a 308/223 class open to any bullet weight, but success in each of these classes will require highly accurate equipment. Highly accurate equipment requires a committment of significant money and dedication to the sport, and franky some shooters - especially those in other disciplines - may not want to dedicate a rifle suystem specifically to shooting the occasional F-Class match, particularly if they aren't even sure they want to continue with it.
What is lacking is a sanctioned entry-level class where newcomers can enjoy the sport using their factory Remington, Savage, Tikka etc. rifle, and be truly successful, in other words, actually have a chance to win in a class where they are on an equal footing equipment-wise.
These shooters will shoot at the double-sized TR target, so they should be capable of success within the technical limitations of an unmodified factory rifle shooting good ammunition.
The technical definition has been paraphrased and condensed here, but essentiall, the rifles consist of:
Any factory bolt action repeater with an unmodifed action, the original factory barrel (as identified by the presence of the factory stamp on the barrel itself), a factory trigger (that MAY be adjusted to any safe weight) but in any stock. Any sight is acceptable, any front rest/bipod, and rear bags may be used. No part of the rifle with the exception of a front bipod may touch the ground during firing, and no devices that connect the front and back of a rifle (shooting cradles) may be used. total weight will be restricted to 12 pounds including all attachments.
This weight restriction will exclude some of the questionable "factory" rifles such as the TRG, the AI, PGW and other purpose-built sniper weapon systems.
Any centerfire factory chambering up to 338 Lapua (within the acceptable ammo allowed on the range used) but no muzzle brakes or compensators may be used.
Exclusions include any purpose built singe shot factory "target rifle" such as the XR100, the Savage F-TR and F-Class rifles, and any custom shop rifles (ie: 40X) Exceptions to the single shot rule include Ruger #1 and TC Encore rifles; these may be used.
There is a "Spirit and intent" clause in the proposed rules that stipulates that the purpose of this class is to create an entry level class. It is intended to attract new shooters, and not all exceptions can be included in one definition, so ultimately the decision as to an acceptable rifle is up to the match director using the "Sprit and Intent" guidelines.
Now, in the last year there was interest in a "Tactical" class. I fully supported the idea, but when it came to holding a match that incorporated a tactical class and giving 6 months of advanced notice and regular publicity here, I got no entries at all. I guess this was one of those ideas that looked better on paper.
I feel that the factory class will provide tactical shooters the opportunity they were looking for. If they are using custom barrels, actions, and equipment then this would represent a rifle with capabilities consistent with either the open or FTR classes. If their equipment is factory, then they can still compete in F-SP class and do well.
Something to ponder....




















































