BCL 102 barrel nut wrench

[Markit]

Decided to keep my BCL102.

First step is stripping it and sending the upper and lower for anodizing

ANyone know who sells a wrench to remove the barrel nut on this thing and if so which wrench to buy?

Don’t want to use a screwdriver and hammer it off.

Many thanks in advance.

Markit

 

[Mixter]

I used liquid wrench and it came off pretty easily

 

[hawk-i]

Decided to keep my BCL102.

First step is stripping it and sending the upper and lower for anodizing

ANyone know who sells a wrench to remove the barrel nut on this thing and if so which wrench to buy?

Don’t want to use a screwdriver and hammer it off.

Many thanks in advance.

Markit

Where are you sending it for the anodizing and what's it going to cost?

 

[Skiman]

Measure the diameter and get a crow foot wrench off amazon?

 

[D-Boy]

Where are you sending it for the anodizing and what's it going to cost?

I asked ATRS ;
IF still virgin and stripped you are looking at $75.00 to anodize the upper and lower. IF it needs to be chemically stripped to get the oils and contamination out, figure on $100.00. IF we have to blast the parts to get machine marks out add $75.00


Use this to remove the barrel
https://truenortharms.com/products/torkey-tool?variant=8116615348332

 

[DiabeticKripple]

I asked ATRS ;
IF still virgin and stripped you are looking at $75.00 to anodize the upper and lower. IF it needs to be chemically stripped to get the oils and contamination out, figure on $100.00. IF we have to blast the parts to get machine marks out add $75.00


Use this to remove the barrel
https://truenortharms.com/products/torkey-tool?variant=8116615348332

This is only half of the tools *needed* to take the barrel off.

He will still need a barrel but wrench.

 

[Markit]

The barrel nut wrench is what I am looking for.

Anyone know who sells em?