For background on my philosophy, see Part 1.
Started out with stock 1301 Gen 2 with the American forend (M-Lok) at the 3, 6, and 9 o'clock position.
Chambered for 3" 12 Ga shells but will fire 2-3/4" as well.
Given my pump guns can hold up to 7 2-3/4" shells, wasn't a fan of the 5 round limit.
This is especially important with a 12 ga semi-auto of which the primary task is to keep it fed and topped up.
A visit to my local gun supply shop had be talking to the sales people. Casually asked them for a specific part and they told me that nothing was being shipped to Canada from the states - including American ammunition that they had to buy from European distributors. Was told, if I can find it available online - buy it as nobody knows when they will get their next shipment. With this in mind, I proceeded to figure out what I needed and buy it at full retail.
My first task was to purchase a CDN 2 round magazine extension. It is blocked to only allow 5.9 rounds of 3" shells.
I originally purchased a GG&G version which included a clamp. It was on special order with no delivery date. I then purchased a Nordic version as it was available. Note - the price of the Nordic version is almost 2X the GG&G version and 3X the S&J version (the latter does not include a clamp like the other 2 do). When using 2-3/4 shells it allows for 6 +1 +1.
I purchased the Nordic version to include the forward sling mounting point. Here is a picture of extension. Quality is pretty darn good. I am right handed so the sling swivel is on the left. Added picatinny rail to see how far it stuck out - will be removing it for weight savings
![20261030_214446[1].jpg 20261030_214446[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128078-6b7307500dec7cb71a01734a7d289e28.jpg)
![20261102_172100[1].jpg 20261102_172100[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128082-4f08090c52686daf877e5fcba13ba007.jpg)
Next on the list was a spare Vortex SPARC 3.5 moa red dot I had laying around. Was going to use the iron sights until I watched a Youtube video of a user stating his times went up when engaging a target after removing his red dot. Given I wear tri-focals, maybe a red dot isn't such a bad idea. I have a couple of other Vortex red dots but you need to engage the rheostat to turn it off/on. The SPARC has a single button on the side and it remembers your last setting. I have 2 of them so a spare is available. Removed the high riser mount and replaced it with the lower one. Factory settings of the iron sights don't allow for co-witnessing. But the top the the ghost ring sits on the front post when the dot is on the front post as well. Its a "kind of witness".
Here is a picture of the red dot and magazine tube extension installed.
![20261030_222228[1].jpg 20261030_222228[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128080-92d328f9c14017f8fe43d9de45796b21.jpg)
I used a sling in a tactical rifle course 15 years ago and really appreciated it. Ordered a Blue Force Vickers sling and the Mappul disconnect for 1.25 inch sling on the front and a locking sling swivel for the rear buttstock Beretta factory stud. Note - I have to find a locking swivel with longer legs as the Beretta stud is longer and doesn't allow the swivel - to - wait for it - swivel.
![20261102_171918[2].jpg 20261102_171918[2].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128074-983f6ec647e2954243c81a1c096f924c.jpg)
Second to last is the light from Fenix. Not that I needed to but I ordered their relatively new GL30R weapon light and attached it to the front. Will write a separate review for it but here are some pictures.
Light, Red Dot, & sling
![20261102_172142[1].jpg 20261102_172142[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128077-5aec70b7b709ef59cffd5f4b23319579.jpg)
Light close up as viewed from the bottom. Picatinny rail on magazine tube will be removed as it serves no purpose at this point.
![20261102_171716[1].jpg 20261102_171716[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128069-b03769c139073d7b096adac34c726abe.jpg)
The last item I am waiting for is the shotgun cards I will be mounting on the receiver and maybe offside buttstock. Will write another review and the chest rig that I used for competition years ago.
Started out with stock 1301 Gen 2 with the American forend (M-Lok) at the 3, 6, and 9 o'clock position.
Chambered for 3" 12 Ga shells but will fire 2-3/4" as well.
Given my pump guns can hold up to 7 2-3/4" shells, wasn't a fan of the 5 round limit.
This is especially important with a 12 ga semi-auto of which the primary task is to keep it fed and topped up.
A visit to my local gun supply shop had be talking to the sales people. Casually asked them for a specific part and they told me that nothing was being shipped to Canada from the states - including American ammunition that they had to buy from European distributors. Was told, if I can find it available online - buy it as nobody knows when they will get their next shipment. With this in mind, I proceeded to figure out what I needed and buy it at full retail.
My first task was to purchase a CDN 2 round magazine extension. It is blocked to only allow 5.9 rounds of 3" shells.
I originally purchased a GG&G version which included a clamp. It was on special order with no delivery date. I then purchased a Nordic version as it was available. Note - the price of the Nordic version is almost 2X the GG&G version and 3X the S&J version (the latter does not include a clamp like the other 2 do). When using 2-3/4 shells it allows for 6 +1 +1.
I purchased the Nordic version to include the forward sling mounting point. Here is a picture of extension. Quality is pretty darn good. I am right handed so the sling swivel is on the left. Added picatinny rail to see how far it stuck out - will be removing it for weight savings
![20261030_214446[1].jpg 20261030_214446[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128078-6b7307500dec7cb71a01734a7d289e28.jpg)
![20261102_172100[1].jpg 20261102_172100[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128082-4f08090c52686daf877e5fcba13ba007.jpg)
Next on the list was a spare Vortex SPARC 3.5 moa red dot I had laying around. Was going to use the iron sights until I watched a Youtube video of a user stating his times went up when engaging a target after removing his red dot. Given I wear tri-focals, maybe a red dot isn't such a bad idea. I have a couple of other Vortex red dots but you need to engage the rheostat to turn it off/on. The SPARC has a single button on the side and it remembers your last setting. I have 2 of them so a spare is available. Removed the high riser mount and replaced it with the lower one. Factory settings of the iron sights don't allow for co-witnessing. But the top the the ghost ring sits on the front post when the dot is on the front post as well. Its a "kind of witness".
Here is a picture of the red dot and magazine tube extension installed.
![20261030_222228[1].jpg 20261030_222228[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128080-92d328f9c14017f8fe43d9de45796b21.jpg)
I used a sling in a tactical rifle course 15 years ago and really appreciated it. Ordered a Blue Force Vickers sling and the Mappul disconnect for 1.25 inch sling on the front and a locking sling swivel for the rear buttstock Beretta factory stud. Note - I have to find a locking swivel with longer legs as the Beretta stud is longer and doesn't allow the swivel - to - wait for it - swivel.
![20261102_171918[2].jpg 20261102_171918[2].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128074-983f6ec647e2954243c81a1c096f924c.jpg)
Second to last is the light from Fenix. Not that I needed to but I ordered their relatively new GL30R weapon light and attached it to the front. Will write a separate review for it but here are some pictures.
Light, Red Dot, & sling
![20261102_172142[1].jpg 20261102_172142[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128077-5aec70b7b709ef59cffd5f4b23319579.jpg)
Light close up as viewed from the bottom. Picatinny rail on magazine tube will be removed as it serves no purpose at this point.
![20261102_171716[1].jpg 20261102_171716[1].jpg](https://www.canadiangunnutz.com/forum/data/attachments/1128/1128069-b03769c139073d7b096adac34c726abe.jpg)
The last item I am waiting for is the shotgun cards I will be mounting on the receiver and maybe offside buttstock. Will write another review and the chest rig that I used for competition years ago.
Attachments
Last edited:


















































