While you are on the site, in your browser find and click "Add to Home Screen" A CGN beaver app icon will then be created to your phone that is directly link to the site.
Note: This feature may not be available in some browsers.
Try a test series that runs from way jammed to at least .080" jump. I have one rifle that prefers jammed and one that prefers a huge jump with the same caliber and load.
Mine prefer's to be jumped slightly, about .004" in this case. Have gotten decent results with a .010" and .020" jam but the small jump seemed to work best.
Adjusting powder charge in very small increments accomplishes the same thing.
I prefer to be off the lands just in case I need to extract the ammo
Almost all my VLD's are shot 10thou off the lands - I don't play with seating depths prefering to tune using powder.
If you change your seating depth but keep your powder charge constant, you are effectively changing the pressure curve of the ammo. Same thing as tweaking the powder charge.
Seems to work just fine.
If you are loading from the mag, that will determine your OAL.
Well I think I'll see what groups best out of the depth's I have then once I see a pattern I'll teak the powder as Jerry is suggesting, I have a long throat in that rifle, 0.080 off the lands to me will be like putting a marble down a funnel.
Well to my surprise the best results were at my starting point of 0.020" OFF the lands, as I progressed closer to the lands the groups opened up.Not at all what I expected.
Four shots touching and one 1/4" off.I will stick with this depth and tweak the charge a little and hopefully get a nice sweet spot.
Fail moment today was when I returned home and was going to remove my targets so I could record and measure, they blew off of my target board in the back of the truck!!
My best results were 0.015" off the lands. I researched what most were doing and worked up the powder charge to get the best groups. A comparator tool will help make this measurement more accurate. I didnt want to jam the bullet as i use it for hunting and wouldnt want a projectile jammed in the throat of the barrel. Take a look at ladder testing if you havent already done so. It was a big help to my load developement.