Best powder for hot 44 Mag

[remington jim]

Yup ! H110 or W296 LiL Gun also ! There the Best ! RJ

 

[jetfixer]

I have been using H110 for the 44 Mag loads being shot in my S&W 629. I previously used W296 (as that is what I was using for 300 Blackout), but my local supply ran out. IMR4227 didn't yield the accuracy I was looking for and tended to produce higher ES and SD numbers.

 

[caramel]

Favorite load crave Litt'le gun

 

[Boomer686]

H110 all the way: solid crimp, Mag primers and always load near max or at Max loads from published data.

 

[WildBill44]

I like N110 but H110, Alliant 2400 and IMR 4227 are great as well.

 

[Evanguy]

When i had a 44 mag rifle my favorite powders were h110 and 2400

 

[toxic]

Would anyone have load data using H110 for 200 grain RNFP hard cast bullets? I'm going to look for heavier bullets but these are what I have for now.

 

[m777]

Hodgdon # 23 has 215 gr GC H110 Max @ 26.0 gr ,no min listed.

Clint

 

[Winchester1973]

23.5 grs H110 with 240 gr bullet nice accurate load

 

[CzyHorse]

The Hunting load in my Marlin 1894 is a 240gn XTP over 24.5gn H110, approx. 1830fps MV, Hornady #10 Data.
It's a real handful in my 6" 629, I'm not real fast getting back on target for a follow up shot.
I usually back off the 629's load to 23.5gn H110 c/w Hornady 240gn XTP, I find shooting this load it's a lot easier and faster to get back on target for follow up shots.

Would anyone have load data using H110 for 200 grain RNFP hard cast bullets? I'm going to look for heavier bullets but these are what I have for now.

I use H110 exclusively with jacketed bullets. Hodgdon On-Line lists no data for Cast Bullets & H110 until your using 300gn plus Gas Checked bullets.
I shoot 200-240gn cast using either TrailBoss or Universal.
To conserve my 'hunting' quality jacketed bullets and to get in some trigger time, I use Campro's 240gn bullet c/w 23.5gn H110.

 

[Falconflyer]

H110 with a 300 grain XTP for full power loads and Trailboss with 240 grain cast bullets for plinking.