BL-22 Ejector issues - anybody else got em?

Big_Bear

Big_Bear

Member
Rating - 100%
54   0   0
Location
Southern QC
Just picked up a used BL-22 on here in pristine condition. Fired about 150 rounds without a hiccup. Now, every 30 rounds or so the ejector pops out. I break the gun down, pop it back in, and everything seems fine. 30 rounds later it pops out again? I see no signs of wear or damage. The spring and plunger seem fine and when the ejector is pushed back in it snaps into place as I believe it should.
Anyone else have this problem?
Thanks for any advice.
 
Does the stud that the ejector hole rides on there? Bent? Broken?
With the ejector placed properly on the stud and riding on the ejector spring (with sufficient tension), riding correctly in the bolt slot, it shouldn't come out.
 
Thanks for the response. I got my nomenclature mixed up. The art that keeps falling out is the extractor, not the ejector. It grabs the spent shells and is visible through the ejection port. It attaches to the bolt with a spring and plunger and is held on with the bolt face. It keeps coming loose.
 
You must log in or register to reply here.
Back
Top Bottom