Bore guide source
- Thread starter SPACEFORCE
- Start date
yodave products has the dewey bore guides
.20 cal dewey rod works good on the tighter CZ barrels, if you want to use a .22 bronze brush then you need to step up to a stainless coated 1 piece rod from dewey, I can't speak of the other available brands
.20 cal dewey rod works good on the tighter CZ barrels, if you want to use a .22 bronze brush then you need to step up to a stainless coated 1 piece rod from dewey, I can't speak of the other available brands
I looked there earlier they don't have any in stock in fact they don't seem to have much stock in general.
- Location
- Nova Scotia
Try Nordic Marksman.
Yodave will be your most economical for the bore guide. Mine has worked great, and even fits my Zephyr II
Wolverine supplies sells the Boretech line of products, and they have a guide for the 457. Pretty pricey though.
For a cleaning rod I have a carbon fiber .17-20 cal, and use a .20cal jag. .22 jags were way to tight even on my non-match chamber Varmint barrel.
Wolverine supplies sells the Boretech line of products, and they have a guide for the 457. Pretty pricey though.
For a cleaning rod I have a carbon fiber .17-20 cal, and use a .20cal jag. .22 jags were way to tight even on my non-match chamber Varmint barrel.
Last edited:
What you want is a rod for a .17
Nordic Marksman has rods and bore guides in stock.
https://nordicmarksman.com/possum-hollow-bore-guide-17hmr/
You'll also need a thread adapter (such as a Pro-Shot 17AD upc 709779300891) - Nordic is currently out of stock but you'll be able to find one somewhere else.
https://nordicmarksman.com/adapter-17-cal-5-40-thread-to-8-32-thread/
Last edited:
Dominion outdoors but it was a few months ago
