Brass thickness, capacity and pressures...

[bigedp51]

Ed, I think our mate decided to lower is powder charge of at leat .75 grains... with the fast, basic rule of thumb the equivalent load should be around 45 grains for the Remington brass.. I don't run it through QL I am out of spare time for now...

Ok, thanks guys. I'm going to shoot these while watching for signs of over-pressure.

If you read the OP first posting I would guess the ammunition is already loaded, the OP also did not reply saying he reduced his charge of 45.9 Grains Win748 in the Remington cases.

This is WHY I posted the pressure figures for Winchester and Remington cases because the Remington cases put him at the maximum pressure level for the .308/7.62.

 

[Keller]

Sorry for the delay guys. I've pulled the bullets on all 50 rounds and reduced the charge to 44.9 Grains.

Lesson learned.