Brno/CZ rings

B

brno375

CGN Regular
Rating - 100%
37   0   0
Location
Langley, B.C.
I am a fan of the Talley's, but there is now another QD option available AND in .300, .400, and .500 heights, for both 1" and 30mm scopes.

h ttp://www.alaskaarmsllc.com/

(They also make a M70 trigger for Mauser 98's).
 
I have been trying to locate some decent looking rings for Brno's and although I have not procured any I would be getting these ones, built in the Czech Republic(?)
Part #72402.
w_ww.jgstrade.com/en/mounts/steel/
The USA rep I spoke will order them in for us and has no problem shipping to Canada.
w_ww.gunxusa.com

They are roughly $105 shipped to your door, duty might be on top of that. These are the closest thing I have found to what OEM equiped 21s with the milled receivers had.

Anyone try a set of these please let us know.
 
If anyone needs CZ European mounts from the factory give me a PM and I will send you to a good friends shop that carries and orders these rings now and then, I have them on alot of my rimfires as they make the best 22 scope mount available today!Dale Z!
 
Hi Warne makes rings for CZ/Brno and Western Gun Parts in Edmonton AB carry them. As i bought a set for my Brno Model 3 just make sure what height you need in order to clear the bolt is all...
 
I have a set of the Alaska arms rings

They are very well made and are a little trimmer and less blocky than the talleys

The drawbacks to them are that the levers are on the wrong side of the rifle (to me), and that you must have the levers in the 9 or 3 o'clock position, while the talleys can be placed in any position.

The recoil lug is also very small and is part of the locking block, rather than part of the main ring body a la talley.
 
You must log in or register to reply here.
Back
Top Bottom