Brownells came knocking on my door today
- Thread starter Remtac
- Start date
Most people say H-4350 is a good powder for 243 also wich I have loaded some with that powder got great results 42.5 grains of it got my standard deviation to 10.8 feet per second . Then I thought I'd try 38gr of reloader15 and got my standard deviation down to 7.9 feet per second and people say its not recommended for 243 ?
Very nice equipment...4350 has the right burn rate for the mid weight bullets but so does Winchester 760 and H414 and they both meter nice cause they are ball powder...RL15 is a good ball powder for the mid weight bullets but is a little faster burning and won't get you as high velocity as H414 and W760 at the same pressures...Have fun.
Makes sense , will keep that in mind .
Congrats on a nice setup.
Unless all your brass has 0.015" or greater wall thickness I would have bought a couple more bushings.
I have also found in my experience that the Redding TiN coated bushings are worth the extra coin.
Unless all your brass has 0.015" or greater wall thickness I would have bought a couple more bushings.
I have also found in my experience that the Redding TiN coated bushings are worth the extra coin.
