Bubba'd M95M with pic's

[H Wally]

Just to reiterate - do not single feed - make sure the 8mm rim is under the extractor before it chambers - they cut the extractors very tight and made them from older extractors so there's almost nothing keeping the head of the extractor attached to the rest of it. Vast majority of M95m's have broken extractors.... I have just such an example I'm trying to fix :/

 

[Nabs]

You are definitely missing the magazine clip that goes with the m95m (not the same as the regular m95s). Unless you can find a replacement, your not going to be able to shoot her properly.

 

[tokguy]

Numrich has the whole modified mag assembly for 65 $.
Just have not decided to order yet, but thanks for the volunteered heads up. I'll never turn down good info.
And I've just carefully stripped a single round from the magazine, treated it just like a K98. No dropping one into the pipe and slamming the bolt home...bad.
And again thanks.
It's kinda cool actually, an M95 in a use-able round. Novel concept.

 

[Nabs]

That is what the Yugoslavians thought too .

 

[Andy]

Numrich has the whole modified mag assembly for 65 $.
Just have not decided to order yet, but thanks for the volunteered heads up. I'll never turn down good info.
And I've just carefully stripped a single round from the magazine, treated it just like a K98. No dropping one into the pipe and slamming the bolt home...bad.
And again thanks.
It's kinda cool actually, an M95 in a use-able round. Novel concept.

There's nothing wrong with your magazine, it's just missing the clip - see this pic (it's the piece on the right):

I doubt that the Numrich mag assembly includes the missing clip, which is next to unobtainable.