Budget Cheekpiece that works!!

nevanevan

nevanevan

Regular
Rating - 100%
156   0   0
Location
Edmonton AB
I thought I would share my most recent build. Although not a rifle, it should signifigantly make it easier for me to shoot tight groups. I referenced a youtube video below,
Then I build my own. It only cost me about $20 give or take and about 2 hours of my time as I am slow at sewing, especially through 3/8" or foam. My pics are below. I thought this would be a great alternative to drilling my stock for a kydex cheekpiece, or spening money on a blackhawk cheekpiece that may or may not be high enough for the job. Its no rifle but it feels great to acomplish something yourself!
20140127_083028.jpg

20140127_082957.jpg

20140127_083020.jpg


Evan
 
Thanks for the post. I'm planning on building something similar ( I'll probably pay my daughter to do the sewing as I have no skills there ). Your design is very close to what I need for my black powder cartridge rifles. I see that you also shoot from the correct side of the rifle :)

Chris.
 
I think this set up cost me less than $7. Some foam, duct tape and a deal extreme stock bag:

http://2.bp.########.com/-7VzgVz29s-g/UtjCHfgivsI/AAAAAAAAS5Y/WhS4Py_QaI8/s1600/DSCN4819.JPG
 
You must log in or register to reply here.
Back
Top Bottom