Building a tiny .22

X

xxclaro

CGN Regular
EE Expired
Rating - 0%
0   0   0
I ahave been thinking for sometime about buildimg myself a really small .22 rifle. I still have to figure out all the legalities of it, but basically I want to make a little single shot backpacking gun. I'm thinking if I cut it to the minimum barrel length,and make a skeleton stock,either wood or some sort of metal,I should be able to make something really light that would fit completely into my backpack when hiking in the mountains. How would you go about this? Anyone have an idea of how they'd build lightweight stock? Perhaps it could be made to fold in some way? Not trying for anything fancy,by any means,as long as it'll shoot good enought to hit grouse at 30 yds I'm happy.
 
papoose-nice,but too heavy and too expensive. A Henry mini-bolt might be okay,at 30 inches and 3.5 lbs, but at $260 also a bit much.
 
xxclaro said:
papoose-nice,but too heavy and too expensive. A Henry mini-bolt might be okay,at 30 inches and 3.5 lbs, but at $260 also a bit much.
Click to expand...

This may not answer your question about building a gun. But the idea that the Marlin is too heavy... wow, you're picky! The Marlin 70PSS is 3.25 lbs! I dig mine, for what it is. Breaks down fast with a nice big barrel nut, no tools. Stainless & synthetic, so who cares if it takes a swim. Packs up to under 24". 16" barrel. Case included (factor that into the price). Room for accessories in the case if you use it. I put a handful of mags and an ATI synthetic bipod into mine and it fits no problem. I'm on the lookout for a slightly more accurate backpack gun, but the Marlin is good (just not bull barrel, bolt-action good). I'd take something slightly heavier, actually, if the accuracy was improved but I won't go any bigger than the 70PSS.

Okay, back to building a gun... I've thought about a 10/22 receiver because there is a large selection of accurate 16" barrels available (also some 12" and 8.5" ones) and then the fabrication is limited to the stock and takedown system. Won't be light, though. :(
 
Last edited:
I was just at my local gun store yesterday, I saw the ugliest .22 I've seen in a while! its a henry .22 take down, it comes apart and fits in the stock, semi auto 5-shot clip. its a perfect back pack gun, only $249.00! I looked it up online and here is a link to see what I am talking about. It is a survival gun, has peep hole sights and did I mention its a semi!

If i were you I would find this attractive, I only say this as I am pretty sure that you cannot build your own, not from scratch anyway unless you go to CFC and get manufactures licensing..... There are some complex legal issues with what u have planned. Now if you start with an already licensed firearm, and the mods u make keep it non-restricted, I say fill your boots big guy. go to her and have fun!!

http://www.henryrepeating.com/h002_survival.cfm

Good luck
 
3.25 lbs is fine, I was looking at it on a website and it stated it was 5.5 lbs,so a bit heavier than I was looking for.Might hafta consider it now.

mtbore said:
This may not answer your question about building a gun. But the idea that the Marlin is too heavy... wow, you're picky! The Marlin 70PSS is 3.25 lbs! I dig mine, for what it is. Breaks down fast with a nice big barrel nut, no tools. Stainless & synthetic, so who cares if it takes a swim. Packs up to under 24". 16" barrel. Case included (factor that into the price). Room for accessories in the case if you use it. I put a handful of mags and an ATI synthetic bipod into mine and it fits no problem. I'm on the lookout for a slightly more accurate backpack gun, but the Marlin is good (just not bull barrel, bolt-action good). I'd take something slightly heavier, actually, if the accuracy was improved but I won't go any bigger than the 70PSS.

Okay, back to building a gun... I've thought about a 10/22 receiver because there is a large selection of accurate 16" barrels available (also some 12" and 8.5" ones) and then the fabrication is limited to the stock and takedown system. Won't be light, though. :(
Click to expand...
 
I have the Savage model 24 in a 22 - 20 gauge combo gun. It may be a little heavier than you are looking for but gives you the option of 22 rimfire or shotgun. It comes in a variety of calibres and gauges. I like the way the barrel hinges on the stock and the whole thing locks in place with the forestock. I attach the case to the outside of my backpack so it is always available without digging through your gear. I also drilled extra holes in the stock to hold extra ammo. All in all a fun little gun. Something to consider. Doing it again, I wish I had bought the 22 - .410 but that's life.
 
Combo gun in .22 and .410 is my choice for back packing...I'd prefer the option of carrying a handgun though, although I will bring a 12 gauge as well in bear country (ie: everywhere).
 
why not keep your eyes peeled at the local gunshows; it is not uncommon to see kids model 22s from the early 1900s for relatively cheap. If necessary you could sleeve the barrel. I am think of guns with 14 - 16" barrels at a guess. To get rid of weight skeletonize the middle of the wood stock. I suspect the weight would come out around 2 lbs but am guessing

cheers mooncoon
 
How about an old Steven's Crackshot ?[ Not the new ones]. Its already a takedown. Nice and light and short. I suppose you could cut down the barrel and skelatenize the stock but it would be a great little gun the way it is. Just my 4 cents.
 
Look on Crickett.com here are the specs. A lot like the old cooey SS. Simple and reliable. $128.00 NEW IN BOX start calling dealers. Some one in Canada will have them.
Model: Crickett
Type: Rifle
Action: Single Shot

Caliber: 22 LR
Finish: Blue
Stock: Synthetic
Stock Description: Black Synthetic
Weight: 2 lbs. 8 oz.
Barrel Length: 16.125
Overall Length: 30
Rate-of-Twist: 1-in-16
Sights: Open Rifle Sights
Special Feature: Youth Model
Safety Features: 2 Position Crossbolt
Drilled & Tapped: YES
Additional Info: Positive Knurling on Cocking M
Additional Info: Integral Lock
Rod
 
You must log in or register to reply here.
Back
Top Bottom