hunter5425 CGN Ultra frequent flyer Rating - 100% 41 0 0 Location Regina SK May 26, 2023 #61 I made the tool and used it a grand total of 3 times, but it did a nice job.
Joel CGN Ultra frequent flyer GunNutz Rating - 99.8% 449 1 0 May 26, 2023 #62 Good job! How much cleaning up did you find the lugs needed? This is way back, but the ones I'd seen were lookin like...55% one side, quite a bit less on the other.
Good job! How much cleaning up did you find the lugs needed? This is way back, but the ones I'd seen were lookin like...55% one side, quite a bit less on the other.
hunter5425 CGN Ultra frequent flyer Rating - 100% 41 0 0 Location Regina SK May 26, 2023 #63 I used a fixture on the lathe to square the lugs up and also squared up the action lug recesses, the lapping was just mostly for polishing.
I used a fixture on the lathe to square the lugs up and also squared up the action lug recesses, the lapping was just mostly for polishing.
