Burris Ring Hight?

[Amphibious]

Rem 700 BDL and Weaver bases?

Scope is a Bushy 3200 3-9x40mm

I like to mount my scopes as low as possible, but unsure what to order, Lows or Med?

Thanks.

 

[Spitzer]

I have a 3200 3-10x40 on my Rem7600 mounted with Weaver bases and Burris Zee rings (Low) if that's any help. It fits perfect, but I didn't have much room for objective BC flip-ups. I just took some sand paper to the bottom of the cap and now it fits fine.
I think the 3-9x model is 1" longer too so it'll be farther up your barrel. I think "Low" should work, but the rear sight might be in the way.

 

[skeetgunner]

Looks like you need medium rings. From Burris site:

Which ring height should I use for my scope ?
Several variables such as action length, barrel taper, placement of scope in rings and outside objective diameter come into play when determining the correct ring height to use . As a general guide line all scopes with outside objective diameters measuring 20mm to 35mm, use low rings . For 36mm to 51mm, use medium rings . For 52mm to 60mm, use high rings .


http://www.burrisoptics.com/rings.html

 

[PEI ROB]

I would try low. I have used several mediums lately and there is a lot of room under the bell, even on AO scopes, with regular barrels.