Hey all, I'm wondering if any one knows the the moa value of the thin line on bushnells multi X reticle? I have a 3200 elite that has this reticle and am just trying to work out ranging/aiming solutions with the reticle. By aiming at a target 100yds away on 9x ( highest power) it seems to be between 4 and 5 moa from the thick line of the reticle to the cross hairs ? My Internet search hasn't come up with anything. Thanks in advace
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Bushnell multi X
- Thread starter obsessed1b
- Start date
best is try to tell about the caliber you are using ...
im able to put down wild boar at 300 meters with a 4200 and the same reticle you are using. im just aiming (holdover) just above the back of the boar and seems to work. works for 180 and 200 grains reloaded.
doa maybe the answer to your question if really you need an holdover otherwise maybe bushnell labs in Canada can answer.
im able to put down wild boar at 300 meters with a 4200 and the same reticle you are using. im just aiming (holdover) just above the back of the boar and seems to work. works for 180 and 200 grains reloaded.
doa maybe the answer to your question if really you need an holdover otherwise maybe bushnell labs in Canada can answer.
so if you are aiming at 100 yards you should be at 3.7 inches above. did you try without holdover to aim a target at 200 yards to see where it hits should below -3 inches.
shooting at 250 yards with no holdover should give you -12 inches without holdover with now changing to use your thick of the reticle you should be dead on. could you try it. there is only by shooting that you will know.
shooting at 250 yards with no holdover should give you -12 inches without holdover with now changing to use your thick of the reticle you should be dead on. could you try it. there is only by shooting that you will know.
