Cadex Customer's Pics

[Cadex Defence]

A proud owner's neat picture of the Field Tactical, here are some specs:

- Rem 700 SPS Tactical .308
- 20" Barrel 1:11 twist rate
- DX2 Cadex Trigger
- Spatha Tactical Gladius Muzzle Brake
- Cadex Optic base and top rings
- Vortex Viper PST 6-24 x 50
- Blue Force QD sling
- Harris Bipod
- Accurate-Mag 10 round

"Rifle shoots 1/2 MOA @ 100 yards with Hornady 155 Amax’s. Longest consistent shot groups to date 754 yards on a 10 inch X 10 inch A500 Plate. I will be reloading compressed loads with the 185 Berger Juggernaughts to go out to 1000."

 

[Cadex Defence]

A nice build with our Dual Strike chassis.
Thanks for sharing your pictures!

 

[Jayph]

Tikka Tactical .308 24"
Competition Chassis with skeleton stock
Cadex sling mount
Tab Gear sling
Atlas Bipod
Spuhr Mount 20 MOA
Vortex Razor HD Gen 2 4.5-27x56mm

Almost done. Just waiting for my bolt knob and shroud from Australia and a Insite muzzle break after Christmas and I have been looking for a TRG trigger to get a two stage but I am not having any luck.

 

[Cadex Defence]

There is a satisfied customer with his Freedom Lite.
Thanks for sharing your nice pictures!
"Awesome platform to work with. Thank you to the hard workers at the Cadex work shop"

 

[burnaby]

Would look even MORE awesome with a CADEX bipod.

There is a satisfied customer with his Freedom Lite.
Thanks for sharing your nice pictures!
"Awesome platform to work with. Thank you to the hard workers at the Cadex work shop"
...

 

[Rstjean]

Here's my newly acquired cadex just got the scope and bipod mounted today. I will take better pictures in the summer when I have cadex rings and a cadex bipod.

 

[6MT]

....Ryan....you son of a gun!

 

[Rstjean]

....Ryan....you son of a gun!

Yeah these are to ###y to pass up. Out with the not that old and in with the new. Lol

 

[Cadex Defence]

A rare look inside the machining process of the Cadex MX-1 Muzzle Brake, proudly displayed by one of our machinists.
This 416 Stainless Steel Muzzle Brake will reduce your Felt Recoil by more than 50%.

 

[RL1]

again from my gun store tour...this time at That Hunting and Fishing Store

starting at the top of the food chain, the Cadex Tremor in .50BMG, a behemoth of a gun of the typical stellar quality we have come to expect from Cadex

Massive bolt

Massive mag

Massive muzzle brake (notice a theme)

I also like the wheel on the scope

With it’s smaller brother in .308

 

[Mister Donut]

Hey Patrice,

I don't usually check our your surveillance section, but does Cadex make anything like this?

http://www.larue.com/larue-tactical-picatinny-rail-adapter

Pic rail qd to tripod mount.

I just bought a tripod and was exploring iptions for some sort of qd plate that than quickly lock onto the bttom pic rail of the Cadex chassis. I have a few rifles in Cadex so it would be nice to have one mount that can qd to any pic rail instead of buying multiple plates for each rifle.

Thanks!

 

[Cadex Defence]

Hey Patrice,

I don't usually check our your surveillance section, but does Cadex make anything like this?

http://www.larue.com/larue-tactical-picatinny-rail-adapter

Pic rail qd to tripod mount.

I just bought a tripod and was exploring iptions for some sort of qd plate that than quickly lock onto the bttom pic rail of the Cadex chassis. I have a few rifles in Cadex so it would be nice to have one mount that can qd to any pic rail instead of buying multiple plates for each rifle.

Thanks!

Hi

I'm sorry but we currently do not offer this type of adapter. We may at one point but for the moment our R&D department is too submerged with the development of other products.

Thanks for your support.

Best regards

 

[Cadex Defence]

again from my gun store tour...this time at That Hunting and Fishing Store

starting at the top of the food chain, the Cadex Tremor in .50BMG, a behemoth of a gun of the typical stellar quality we have come to expect from Cadex

Awesome pics by the way. Thnaks for sharing

 

[Cadex Defence]

A Great looking Custom Build Remington 700 in a Cadex Chassis.
Look's Great! Love the Flag!

 

[Cadex Defence]

Cadex is proud to announce the addition of multiple left handed chassis for the Tikka T3 rifles to its 2017 products line.

 

[Cadex Defence]

Nice picture from SHWAT team with one of our Dual Strike chassis. Thanks for sharing!
"Never knew how much I'd enjoy long range. Shooting past 1000 yards is great."

 

[Cadex Defence]

Don’t miss the Cadex Booth #13368 at the Shot Show next week! See you there!

 

[Cadex Defence]

Visit us at the Las Vegas Shot Show next week at booth #13368 to see these amazing rifles!

 

[griffin86]

When will the new bipod be available to purchase?

 

[teknition]

A rare look inside the machining process of the Cadex MX-1 Muzzle Brake, proudly displayed by one of our machinists.
This 416 Stainless Steel Muzzle Brake will reduce your Felt Recoil by more than 50%.

View attachment 79296

You need a skilled artisan along with this skilled machinist to bring out the rest of the snake head in that brake and make a limited run. Probably not any more time on the CNC, and I'm sure people would be willing to pay a premium for it. If you do a run, I get first dibs for the idea.