Calling PPQ M2 22 owners....

JordanYOW

Regular
Rating - 100%
21   0   0
Location
Ottawa
For anyone that owns a PPQ M2 22, do you have a rattle somewhere in the grip/trigger area? I just got one, never fired, from a site sponsor. I called about it and was told "uhh...call North Sylva" on a gun I bough from them and got the reg. only today. So much for service.

Is this normal by any chance? If not..I will follow up with them and post the vendor if things don't get resolved.
 
I bought my PPQ M2 22 used so I won't comment on the cleanliness but I don't hear a rattle when I shake my gun, at most I hear something like it's shifting a tiny bit.
 
I just got a new one recently . The barrel was dirty as expected from a few rounds fired from the factory. First patch was black second one pretty clean so not much concern there. It is rimfire after all. The internals were spec and span. As for the rattle, it's probably the guide rod. If I recall there is some sort of collar or ring around the base of it. If you lock the slide back I'm sure you wont hear it. Also if you have an empty mag inserted you'll hear slight rattle too .

Compared to the 9mm the trigger isn't quite as tight . But its close. I dont think theres anything wrong with what you got
 
I just got a new one recently . The barrel was dirty as expected from a few rounds fired from the factory. First patch was black second one pretty clean so not much concern there. It is rimfire after all. The internals were spec and span. As for the rattle, it's probably the guide rod. If I recall there is some sort of collar or ring around the base of it. If you lock the slide back I'm sure you wont hear it. Also if you have an empty mag inserted you'll hear slight rattle too .

Compared to the 9mm the trigger isn't quite as tight . But its close. I dont think theres anything wrong with what you got

Nope, it's not the guide rod because it does it locked and rod removed. Does it with a mag or not, dummy rounds or not. Definitely doesn't sound normal.
 
Back
Top Bottom