CamPro Load Data for 9mm Luger, 45ACP and 223 Reminging

thechineseguy

CGN frequent flyer
EE Expired
Rating - 100%
9   0   0
Location
GTA
edit: just noticed the spelling error for "remington" lol

Patrick at CamPro sent me these. i thought some of you may find this handy.
the original file was pdf but i converted to jpg for posting. i did not resize them so you could print them out.
he also said that their website will have load data available in a few weeks.

dyvczp.jpg


1zqx0du.jpg


xd5h8j.jpg
 
whoa, that's a pretty short COL for the 147gr 9mm. I do mine at 1.100". Have run test batches from 1.200 down to 1.100" in 0.020" increments. May now run a couple of test batches at 1.080" and 1.060".
 
Can pro 124 HP's.
They have old and new batches.
I had come accross an old batch, I loaded them up but they did not pass the plunk test. New bullets are fine at 1.090, the old ones needed to be at 1.080!!! Easy to tell the difference as one of them has a flat base and the other has a concave base.
 
I have been loading my 115 grain below the tight group starting load and it cycles my fn9 perfectly.

i've tried as low as 3.6gr titegroup under 124gr RN and it cycled fine in my shadow but felt way too soft for my liking. i settled on using 4.1gr and it feels perfect for me.
 
another load to add to 9mm 124gr RN is 3.9-4.3gr N320

i asked him for this load and he ended up sending me all these data sheets
 
Anybody why they don't list a Bullseye load for the 147 grn 9mm round?

For what it's worth, I did up some loads this last weekend. Out of my Shadow, I was getting 891 fps (131 PF) with 3.4 gr of Bullseye. This was listed as the starting load for a 147 FMJ out of my Lyman manual, but I realize it is a different bullet. It is right where I want it though, so I didn't bother testing a higher charge.
 
Their max for 124 in 9mm is over hodgdon max with titegroup. Interesting.

Looks like a pretty hot load for the HS-6 under the 230 RN, as well.
CamPro's 'Start' load, matches Hodgdon's 'Max' load.

I load mine at 7.3gr HS-6 with CamPro's. Cycles perfectly and the bullet makes it to the paper every time.
(Hodgdon data says 7.0-8.0)
 
Seems legit, I've loaded several thousand 115gr 9mm Campro with 4.8 gr of HP-38 at 1.125 COAL and it works great in my SR9. Also tried 5.0 gr of HP-38 and it also worked fine, dialed it back a bit just because. Can't wait to see what their .44 data is like.
 
I use titegroup with my 9mm 124gr oal. 1.11 and 4.1gr gets about 1090fps from my glocks.
My .45 230gr hardball load is 5.0gr of titegroup for about 830. Don't have the oal handy.
.223 I load a 5.56 pressure load of 25.5gr H335. It's a little hot for a .223 chamber. Don't have the velocity handy but I think it was around 3080fps from a 18.5" barrel.
 
Back
Top Bottom