CamPro Load Data for 9mm Luger, 45ACP and 223 Reminging

[vrex]

Thanks for the info.

I've been running the Campro 223 55gr FMJ's with 24 grains Varget with good results.

 

[hometownhero]

Anything for the 147gr 30cal fmj??

 

[silverfoxdj]

That's handy thanks

 

[wkmiller]

Tagged

 

[Mr.Crumbz]

Awesome! Was hoping to come across something like this. Thanks guys!

 

[ziprhead]

This is brilliant. I just bought some CAMPRO 9mm 147gr FP and some Titegroup, and was looking for loading data. What a coincidence! Excellent posting and thanks to all.

 

[Rebes]

Thank you! I was loading 9mm 124gr RN with 6.2gr HS-6, and I felt it was a little on the light side. I was just in the process of bumping my measure up to 6.4gr, so this just confirms my suspicions!

 

[godgab]

Nice thanks alot man

 

[Grummpy]

Thanks for the info!

 

[dinsdale]

The 147 load with Unique is hot.

I'm loading 3.8 grains unique @ 1.100 out of a CZ75b and I'm at 131 PF

 

[Jonesyatpl]

Anyone tried the Campro .308 FMJ projectiles? Seems to be a relatively quiet related subject.

 

[badboybeeson]

Anyone tried the Campro .308 FMJ projectiles? Seems to be a relatively quiet related subject.

I'm runing Campro 147 with 42gr varget in my ar10 and m14.

 

[badboybeeson]

Thanks for the info.

I've been running the Campro 223 55gr FMJ's with 24 grains Varget with good results.

I've done the same with good results also 22 of 3031 for plucking loads

 

[Jonesyatpl]

I'm runing Campro 147 with 42gr varget in my ar10 and m14.

Thanks, bbb!

I assume no complaints. Looking to run some in a 305 as well.

 

[VanMan]

Ran a few batches last week of 147gr Campro with 3.55g N320 at 1.100, 1.080, and 1.060 COL's. Looks like each decrease of 0.020" increased average speed by ~9fps. Looks like I should be able to drop my powder charge down to 3.3gr of N320 and still make ~130 at 1.060" COL. Thanks for the posting this Load Data from Campro. I would not have tried for such a short COL without it.


View attachment 50581

Primers show no obvious pressures (1.100 - I, 1.080 - II, 1.060 - III)
View attachment 50582

 

[Smcx]

It seems you can push the 240gr campro .44's too fast. I think i was shedding jackets with 24gr of h110. They all went "fizzzzzz" downrange out of my revolver and lever lol